p.1
p.15
p.39
p.55
p.69
p.89
p.125
p.143
p.157
Processing of Refractory Metal Borides, Carbides and Nitrides
Abstract:
Transition metal borides, carbides and nitrides are candidates for very high temperature applications. A review of various processing techniques to fabricate dense monolithic and composite materials is presented. In particular, we focus on reactive hot pressing (RHP) which allows synthesis and densification to be achieved simultaneously. We report the RHP of composites in the Ti-B-N, Zr-B-C and Zr-B-Si-C systems using the reactions of Ti/BN, Zr/B4C (Si, SiC particulate) powder mixtures at moderate pressures and temperatures. Substantial reductions in processing temperature may be realized from those in excess of 1800°C down to as low as 1200°C by exploiting a combination of transient liquid phases, plasticity in a non-stoichiometric ZrC and enhanced transport in a sub-micron microstructure.
Info:
Periodical:
Pages:
69-88
DOI:
Citation:
Online since:
October 2008
Authors:
Price:
Сopyright:
© 2009 Trans Tech Publications Ltd. All Rights Reserved
Citation:
[1] R. G. Munro: J. Res. Natl. Inst. Stand. Techn., Vol. 105.
[5] (2000), p.709.
[2] L. Rangaraj, C. Divakar and V. Jayaram: J. Am. Ceram. Soc., Vol. 87.
[10] (2004), p.1872.
[3] K. Upadhya, J.M. Yang and W.P. Hoffman: Am. Ceram. Soc. Bull., 76.
[12] (1997), p.51.
[4] F. Monteverde, S. Guicciardi and A. Bellosi: Mat. Sci. & Eng., Vol. A346 [1-2], (2003), p.310.
[5] W. G. Fahrenholtz, G.E. Hilmas, I. G. Talmy and J. A. Zaykoski: J. Am. Ceram. Soc., Vol. 90.
[5] (2007), p.1347.
[6] C. A. Hoffman: NASA Technical memorandum E52L15a, Lewis Flight Propulsion Laboratory, Cleveland, OH, (1953).
[7] F. Monteverde and A. Bellosi: J. Electrochem. Soc., 150.
[11] (2003), p. B552.
[8] M. M. Opeka, I. G. Talmy and J. A. Zaykoski: J. Mat. Sci., 39 (2004) p.5887.
[9] W.C. Tripp, H.H. Davis and H.C. Graham: Am. Ceram. Soc. Bull., Vol. 52.
[8] (1973), p.612.
[10] F. Monteverde, A. Bellosi and S. Guicciardi: J. Eur. Ceram. Soc., Vol. 22 (2002), p.279.
[11] E. Opila, S. Levine and J. Lorincz: J. Mat. Sci., Vol. 39 (2004), p.5969.
[12] S. R. Levine, E. J. Opila, M.C. Halbig, J.D. Kiser, M. Singh and J.A. Salem: J. Eur. Ceram. Soc., Vol. 22 (2002), p.2757.
[13] S.N. Karlsdottir and J.W. Halloran: J. Am. Ceram. Soc., Vol. 90.
[10] (2007), p.3233.
[14] S.N. Karlsdottir, J.W. Halloran and C.E. Henderson: J. Am. Ceram. Soc., Vol. 90.
[9] (2007), p.2863.
[15] A. Rezaie, W. G. Fahrenholtz and G.E. Hilmas: J. Am. Ceram. Soc., Vol. 89.
[10] (2006), p.3240.
[16] S. Tang, J. Deng, S. Wang. W. Liu and K. Yang: Mat. Sci. Eng. A, 465 (2007) p.1.
[17] M. Gasch, D. Ellerby, E. Irby, S. Beckman, M. Gusman and S. Johnson: J. Mat. Sci., 39 (2004) p.5925.
[18] L. Scatteia, A. Riccio, G. Rufolo, F. De Filippis, A. Del Vecchio, G. Marino, AIAA/CIRA 13th International Space Planes and Hypersonics Systems and Technology AIAA 2005-3266.
DOI: 10.2514/6.2005-3266
[19] R. Raj and R.K. Bordia: Acta Materialia 32.
[7] (1984), p.1003.
[20] R.K. Bordia and R. Raj: J. Am. Ceram. Soc., Vol. 71.
[4] (1988), p.302.
[21] L.C. De Jonghe, M.N. Rahaman and C.H. Hseuh: Acta Materialia Vol. 34.
[7] (1986), p.1467.
[22] M.N. Rahaman and L.C. De Jonghe: J. Am. Ceram. Soc., Vol. 70.
[12] (1987), p. C-348.
[23] Z. S. Rak and J. Czechowski: J. Euro. Ceram. Soc., Vol. 18 (1998), p.373.
[24] H. R. Baumgartner and R. A. Steiger: J. Am. Ceram. Soc., Vol. 67.
[3] (1984), p.207.
[25] S. Baik and P. F. Becher: J. Am. Ceram. Soc., Vol. 70.
[8] (1987), p.527.
[26] M. Quabdesselam and Z. A. Munir: J. Mat. Sci., Vol. 22.
[5] (1987) p.1799.
[27] S. K. Mishra, S. Das, S. K. Das and P. Ramachandrarao: J. Mat. Res., Vol. 15.
[11] (2000), p.2499.
[28] S. K. Mishra, S. K. Das, A. K. Ray and P. Ramachandrarao: J. Am. Ceram. Soc., Vol. 85.
[11] (2002), p.2846.
[29] D. Sciti, M. Brach and A. Bellosi: J. Mat. Res., Vol. 20.
[4] (2005), p.922.
[30] D. Sciti, S. Guicciardi and A. Bellosi: J. Am. Ceram. Soc., Vol. 89.
[7] (2006), p.2320.
[31] L. Silvestroni and D. Sciti: Scripta Materialia Vol. 57 (2007), p.165.
[32] S. C. Zhang, G. E. Hilmas and W. G. Fahrenholtz: J. Am. Ceram. Soc., Vol. 89.
[5] (2006), p.1544.
[33] A. L. Chamberlain, W. G. Fahrenholtz and G. E. Hilmas: J. Am. Ceram. Soc., Vol. 89.
[2] (2006), p.450.
[34] K. Shobu, T. Watanabe, Y. Enomoto, K. Umeda and Y. Tsuya: J. Am. Ceram. Soc., Vol. 70.
[5] (1987), p. C-103.
[35] T. Graziani, C. Melandri and A. Bellosi: J. Hard Materials Vol. 4 (1993), p.29.
[36] S.H. Shim, K. Kiihara, K.H. Auh and K.B. Shim: J. Microscopy, Vol. 205.
[3] (2002), p.238.
[37] Y. Yan, Z. Huang, S. Dong and D. Jiang: J. Am. Ceram. Soc., Vol. 89.
[11] (2006), p.3589.
[38] S.Q. Guo, Y. Kagawa, T. Nishimura and H. Tanaka: Scripta Materialia, 58 (2008), p.579.
[39] A. L. Chamberlain, W. G. Fahrenholtz, G. E. Hilmas and D. T. Ellerby: J. Am. Ceram Soc., Vol. 87.
[6] (2004), p.1170.
[40] M. M. Opeka, I. G. Talmy, E. J. Wuchina, J. A. Zaykoski and S. J. Causey: J. Eur. Ceram. Soc., Vol. 19 [13-14] (1999), p.2405.
[41] D. Kalish, E. V. Clougherty and K. Kreder: J. Am. Ceram. Soc., Vol. 52.
[1] (1969), p.30.
[42] J. J. Melendez-Martinez, A. Dominguez-Rodriguez, F. Monteverde, C. Melandri and G. de Portu: J. Eur. Ceram. Soc., Vol. 22 (2002), p.2543.
[43] K. Shobu and T. Watanabe: J. Powder Metall. Soc. Japan Vol. 32.
[6] 1995), p.215.
[44] T. Watanabe, H. Yamamoto, K. Shobu and T. Sakamoto: J. Am. Ceram. Soc., Vol. 71.
[4] (1987), p. C-202.
[45] F. Monteverde and A. Bellosi: Scripta Materialia Vol. 46 (2002), p.223.
[46] K. Biswas, B. Basu, A.K. Suri and K. Chattopadhyay: Scripta Materialia Vol. 54 (2006), p.1363.
[47] G.B. Raju and B. Basu: J. Am. Ceram. Soc., 90.
[11] (2007), p.3415.
[48] S.K. Bhaumik, C. Divakar, L. Rangaraj and A.K. Singh: Mat. Sci. & Eng., Vol. A257 (1998), p.341.
[49] W.G. Fahrenholtz, G.E. Hilmas, A.L. Chamberlain and J.W. Zimmermann: J. Mat. Sci., Vol. 39 (2004), p.5951.
[50] D. Sciti and S. Guicciardi: J. Mat. Res., Vol. 19.
[11] (2004), p.3343.
[51] A. Bellosi, F. Monteverde and D. Sciti: Int. J. Appl. Ceram. Techno., Vol. 3.
[1] (2006), p.32.
[52] J. Marschall, D.C. Erlich, H. Manning, W. Duppler, D. Ellerby and M. Gasch: J. Mat. Sci., Vol. 39.
[19] (2004), p.5959.
[53] F. Monteverde: Appl. Physics A Vol. 82 (2006), p.329.
[54] F. Monteverde and A. Bellosi: J. Mat. Res., Vol. 19 (2004), p.3576.
[55] V. Medri, F. Monteverde, A. Balbo and A. Bellosi: Adva. Eng. Mat., Vol. 7.
[3] (2005), p.159.
[56] F. Monteverde and A. Bellosi: Solid State Science Vol. 7 (2005), p.622.
[57] R. A. Andrievskii, L. A. Korolev, V. V. Klimenko, A. G. Lanin, I. I. Spivak and I. L. Taubin: Powder Metall. Metal Ceramics Vol. 19.
DOI: 10.1007/bf00792032
[2] (1980), p.93.
[58] A. Chamberlain, W. Fahrenholtz, G. Hilmas and D. Ellerby: Refractories Applications Transactions, Vol. 1.
[2] (2005), p.1.
[59] F. Monteverde: Corrosion Science Vol. 47 (2005), p. (2020).
[60] D. Sciti, L. Silvestroni and A. Bellosi: J. Mat. Res., Vol. 21.
[6] (2006), p.1460.
[61] M. Nygren and Z. Shen: Solid State Science Vol. 5.
[1] (2003), p.125.
[62] A. Balbo and D. Sciti: Mat. Sci. Eng., A 475 (2008) p.108.
[63] W. Feng, P. Xiong, L. Yu, Y. Zheng and Y. Xia: Int. J. Refr. Metals Hard Materials Vol. 22.
[2] -3] (2004), p.133.
[64] B. Basu, T. Venkateswaran and D.Y. Kim: J. Am. Ceram. Soc., Vol. 89.
[8] 2006), p.2405.
[65] J. W. Lee, Z. A. Munir, M. Shibuya and M. Ohyanagi: J. Am. Ceram. Soc., Vol. 84.
[6] (2001), p.1209.
[66] D. Sciti, L. Silvestroni and M. Nygren: J. Eur. Ceram. Soc., 28 (2008) p.1287.
[67] H. Wang, C.A. Wang, X. Yao and D. Fang: J. Am. Ceram. Soc., Vol. 90.
[7] 2007), p. (1992).
[68] K. H. Kim and K. B. Shim: Mat. Characterization Vol. 50 (2003), p.31.
[69] S.Q. Guo, Y. Kagawa, T. Nishimura, D. Chung and J. M. Yang: J. Eur. Ceram. Soc., 28 (2008) p.1279.
[70] A.M. Locci, R. Orru, G. Cao and Z.A. Munir: J. Am. Ceram. Soc., 89.
[3] (2006) p.848.
[71] Y. Zhao, L.J. Wang, G.J. Zhang, W. Jiang and L.D. Chen: J. Am. Ceram. Soc., 90.
[12] (2007) p.4040.
[72] A.C.D. Chaklader and L.G. Mckenzie: J. Am. Ceram. Soc., Vol. 49.
[9] (1966), p.477.
[73] A.C.D. Chaklader and R.C. Cook: Am. Ceram. Soc. Bull., Vol. 47.
[8] (1968), p.712.
[74] S.K. Lee, D.H. Kim and C.H. Kim: J. Mat. Sci., Vol. 29.
[15] (1994), p.4125.
[75] H. Zhao and Y. B. Cheng: Ceram. International Vol. 25.
[4] (1999), p.353.
[76] K. Wang and V.D. Kristic: Acta Materialia Vol. 51 (2003), p.1809.
[77] M. W. Barsoum and B. Houng: J. Am. Ceram. Soc., Vol. 76.
[6] (1993), p.1445.
[78] G. Wen, S. B. Li, B. S. Zhang and Z.X. Guo: Acta Materialia Vol. 49 (2001), p.1463.
[79] G.J. Zhang: Ceramic International Vol. 21.
[1] (1995), p.29.
[80] G.J. Zhang, Z.Z. Jin and X. Yue: J. Am. Ceram. Soc., Vol. 78.
[10] (1995), p.2831.
[81] F. Olevsky, P. Mogilevsky, E.Y. Gutmanas and I. Gotman: Metallu. & Mater. Transactions Vol. 27A (1996), p. (2071).
[82] I. Gotman, N.A. Travitzky and E. Y Gutmanas: Mat. Sci. & Eng., Vol. A244 (1998), p.127.
[83] E.Y. Gutmanas and I. Gotman: Ceramic International Vol. 26 (2000), p.699.
[84] G.J. Zhang and Z.Z. Jin: Ceramic International Vol. 22 (1996), p.143.
[85] G. J. Zhang, X. M Yue, Z.Z. Jin and J.Y. Dai: J. Eur. Ceram. Soc., Vol. 16.
[9] (1996), p.409.
[86] S.K. Bhaumik, C. Divakar, A. K. Singh and G.S. Upadhyaya: Mat. Sci. & Eng., Vol. A279 (2000), p.275.
[87] J.W. Lee, Z. A. Munir and M. Ohyanagi: Mat. Sci. & Eng., Vol. A325 (2002), p.221.
[88] G. J. Zhang, Z.Y. Deng, N. Kondo, J.F. Yang and T. Ohji: J. Am. Ceram. Soc., Vol. 83.
[9] (2000), p.2330.
[89] G.J. Zhang, M. Ando, J.F. Yang, T. Ohji, and S. Kanzaki: J. Euro. Ceram. Soc., Vol. 24 (2004), p.171.
[90] W.W. Wu, G. J. Zhang, Y. M. Kan and P. L Wang: J. Am. Ceram. Soc., Vol. 89.
[9] (2006), p.2967.
[91] J. W. Zimmermann, G.E. Hilmas, W.G. Fahrenholtz, F. Monteverde and A. Bellosi: J. Eur. Ceram. Soc., Vol. 27 (2007), p.2729.
[92] Q. Tai and A. Mocellin: J. Am. Ceram. Soc., Vol. 85.
[7] (2002), p.1763.
[93] G.J. Zhang, Y. Beppu, M. Ando, J. F. Yang and T. Ohji: J. Am. Ceram. Soc., Vol. 85.
[11] (2002), p.2858.
[94] G.J. Zhang, Y. Beppu, T. Ohji and S. Kanzaki: Acta Materialia Vol. 49 (2001), p.77.
[95] J. Li, G. Y. Yang, J. Zhu, L.Q. Zhang. W.Y. Yang and Z. Q. Sun: J. Am. Ceram. Soc., Vol. 83.
[4] (2000), p.992.
[96] W. G. Fahrenholtz, R.E. Loehman and K. G. Ewsuk: J. Am. Ceram. Soc., Vol. 85.
[1] (2002), p.258.
[97] J. Li, G. Bai. D. Jiang and S. Tan: J. Am. Ceram. Soc., Vol. 88.
[6] (2005), p.1659.
[98] G.J. Zhang, J. F. Yang, M. Ando, T. Ohji and S. Kanzaki: J. Am. Ceram. Soc., Vol. 87.
[2] (2004), p.296.
[99] W. G. Fahrenholtz, D.T. Ellerby and R. E. Loehman: J. Am. Ceram. Soc., Vol. 83.
[5] (2000), p.1279.
[100] A.L. Chamberlain, W.G. Fahrenholtz and G.E. Hilmas: J. Am. Ceram. Soc., Vol. 89.
[12] (2006), p.3638.
[101] L. Rangaraj, S. J. Suresha, C. Divakar and V. Jayaram, Meta. Mat. Trans. A (in Press).
[102] L.E. Toth, Transition metal carbides and nitrides, (Academic Press, New York, 1971).
[103] D.B. Miracle and H.A. Lipsitt: J. Am. Ceram. Soc., Vol. 66.
[8] (1983), p.592.
[104] D.J. Rowcliffe: Deformation of ceramics, ed., Richard E. Tressler and Richard C. Bradt, Plenum Publishing Corporation, 49-71 (1984).
[105] W.S. Williams: J. Appl. Physics Vol. 35.
[4] (1964), p.1329.
[106] D.W. Lee and J.S. Haggerty: J. Am. Ceram. Soc., Vol. 52.
[12] (1969), p.641.
[107] S. S. Ordanyan, A.K. Kravchik and V.S. Neshpor: Powder Metall. Metal Ceram., 1977, vol. 16.
[12] p.57.
[108] G.V. Samsonov and S. A. Bozhko: Powder Metall. Metal Ceram., 1970, vol. 9.
[3] p.35.