Paper Titles
Thermal Conductivity of Nano-Pore Dispersed Y-PSZ Fabricated by EB-PVD
p.509
Thermal Stability and Mechanical Properties of Plasma Sprayed Al2O3/ZrO2 Nano-Composite Coating
p.513
Investigation of Strontium-Niobium Oxides for Application to Thermal Barrier Coatings
p.517
Thermal Conductivity of Zirconia for Thermal Barrier Coatings: A Perturbed Molecular Dynamics Study
p.521
Mechanical Properties and Damage Durability of Thermal Barrier Coatings with Thermal Fatigue
p.525
Advances in YSZ Coatings Prepared by Sol-Gel Route. Applications to Fuel Cells or Thermal Barrier Coatings
p.529
New Challenge of Plasma Spray Coatings in Nano Oxide Ceramics
p.533
Development of Nanostructured Al2O3-Ni HVOF Coatings
p.539
Process Optimization for Nanostructured HVOF -Sprayed Al2O3-Based Ceramic Coatings
p.545

Mechanical Properties and Damage Durability of Thermal Barrier Coatings with Thermal Fatigue

Article Preview

Abstract:

The effects of thermal fatigue conditions on the mechanical and contact damage behavior in thermal barrier coatings (TBCs) are investigated as functions of the bond coat thickness and the preparation method. Three kinds of TBCs with different thickness in the bond coat are prepared by two different methods of APS and HVOF. The static and cyclic thermal fatigues for the TBCs are conducted at temperatures of 950 and 1100 with different dwell times of 10 and 100 hr and 10 cycles at each temperature. Mechanical properties, hardness H and modulus E, in each condition and component are measured by nano-indentation. The contact damage behaviors are investigated by Hertzian indentation, including the cyclic fatigue behavior on the surface of the TBCs. The TGO formation is dependent on both temperature tested and time exposed, showing a similar effect with the cyclic thermal fatigues. The mechanical properties of the TBCs are increased due to the re-sintering of the top coating and the composition change of the bond coat during the thermal fatigues. The contact damage behaviors are affected by the thermal fatigue conditions and the fabrication method, independent of the bond coat thickness.

You might also be interested in these eBooks
The Science of Engineering Ceramics III View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 317-318)

Pages:

525-528

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.317-318.525

Citation:

Cite this paper

Online since:

August 2006

Authors:

Hyung Jun Jang, Dong Beak Kim, Yeon-Gil Jung, Jung Chel Chang, Sung Churl Choi, Ung Yu Paik

Keywords:

Contact Damage, Mechanical Property, Thermal Barrier Coating (TBC), Thermal Fatigue

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2006 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] S. Wuttiphan, A. Pajares, B.R. Lawn and C. C. Berndt: Thin Solid Films Vol. 293 (1997), pp.251-260.

DOI: 10.1016/s0040-6090(96)08992-4

Google Scholar

[2] A. Bennet: Mater. Sci. Technol. Vol. 30 (1987), p.1.

Google Scholar

[3] J.R. Brandon and R. Taylor: Surf. Coat. Technol. Vol. 39 (1989), p.143.

Google Scholar

[4] Feng Tang, Leonardo Ajdelsztajn, Julie M. Schoenung: Scripta Materialia Vol. 51 (2004), p.25.

Google Scholar

[5] F. Guiberteau, N.P. Padture, H. Cai and B.R. Lawn: Philos. Mag. A68 (1993), p.1003.

Google Scholar

[6] M.V. Swain and B.R. Lawn: Phys. Stat. Solid. Vol. 35 (1969), p.909.

Google Scholar

[7] Antonia Pajares, Lanhua Wei, Brian R. Lawn, Nitin P. Padture, Christopher C. Berndt: Mater. Sci. Eng. A Vol. 208 (1996), p.158.

Google Scholar