Paper Titles
Laser and Hybrid Laser-MIG Welding of 6.35 and 12.7mm Thick Aluminium Aerospace Alloy
p.1139
Interfacial Microstructure of Magnetic Pressure Seam Welded Al-Fe, Al-Ni and Al-Cu Lap Joints
p.1145
Liquid Film Migration in Aluminium Brazing Sheet?
p.1151
Interface Reactions of Al and Binary Al-Alloys on Mild Steel Substrates in Controlled Atmosphere
p.1157
Effect of Welding Parameters on Mechanical and Microstructural Properties of Dissimilar AA6082-AA2024 Joints Produced by Friction Stir Welding
p.1163
Epitaxial Grain Growth during Surface Modification of Friction Stir Welded Aerospace Alloys by a Pulsed Laser System
p.1169
Creep and Creep Rupture of FSW Joints of 5052 Aluminium Alloy Plates
p.1175
Microstructural Evolution in AA7449 Plate Subject to Friction Stir Welding and Post Weld Heat Treatment
p.1181
Investigation of Global Buckling Distortion in Welding of a Thin Wall Aluminium T Joint
p.1187

Effect of Welding Parameters on Mechanical and Microstructural Properties of Dissimilar AA6082-AA2024 Joints Produced by Friction Stir Welding

Article Preview

Abstract:

The effect of processing parameters on mechanical and microstructural properties of dissimilar AA6082-AA2024 joints produced by Friction Stir Welding was analysed in the present study. Different samples were produced by employing a fixed rotating speeds of 1600 RPM and by using the advancing speeds of the tool of 80 and 115 mm/min. All the welds were produced in direction perpendicular to the rolling one for both the alloys and by changing, for all the processing conditions, the alloy positioned on the advancing side of the tool. The mechanical properties of the joints were evaluated by room temperature tensile tests. Fatigue tests on the welds were carried out by using a resonant electro-mechanical testing machine under constant loading control up to 250 Hz sine wave loading. The fatigue tests were conducted in the axial total stress-amplitude control mode with R=smin/smax=0.1. The microstructural evolution of the material was analysed by optical observations of the welds cross sections and SEM observations of the fracture surfaces.

You might also be interested in these eBooks
Aluminium Alloys 2006 - ICAA10 View Preview

Info:

Periodical:

Materials Science Forum (Volumes 519-521)

Pages:

1163-1168

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.519-521.1163

Citation:

Cite this paper

Online since:

July 2006

Authors:

Pasquale Cavaliere, Antonio Squillace

Keywords:

Dissimilar Joining, Fatigue, Friction Stir Welding (FSW)

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2006 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] R. S. Mishra, Z. Y. Ma: Mater. Sci. and Eng. R50 (2005), p.1.

Google Scholar

[2] G. Bussu, P.E. Irving: Int. J. of Fatigue 25 (2003) p.77.

Google Scholar

[3] R. John, K.V. Jata and K. Sadananda,: Int. J. of Fatigue, 25, (2003) p.939.

Google Scholar

[4] K.V. Jata, K.K. Sankaran and J. Ruschau: Met. and Mater. Trans. 31A (2000) p.2181.

Google Scholar

[5] M. Guerra, C. Schmidt, J.C. McClure, L.E. Murr, A.C. Nunes: Mater. Charac. 49 (2003) p.95.

Google Scholar

[6] C.G. Rhodes, M.W. Mahoney, W.H. Bingel: Scripta Mater. 36 (1997) p.69.

Google Scholar

[7] P. Cavaliere, E. Cerri, A. Squillace: J. of Mater. Sci. 40 (2005) p.3669.

Google Scholar

[8] W. B. Lee, Y. M. Yeon, S. B. Jung: J. of Mater. Sci. 38 (2003) p.4183.

Google Scholar

[9] L. E. Murr, N. A. Rodriguez, E. Almanza, C. J. Alvarez: J. of Mater. Sci. 40 (2005) p.4307.

Google Scholar

[10] P. Bala Srinivasan, W. Dietzel, R. Zettler, J. F. Dos] Santos, W. Sivasan: Mater. Sci. and Eng. A392 (2005) p.292.

Google Scholar

[11] J. H. Ouyang, R. Kovacevic: J. of Mater. Eng. and Performance 11 (2002) p.51.

Google Scholar

[12] Won-Bae Lee, Yun-Mo Yeon, Seung-Boo Jung: Scripta Mater. 49 (2003) p.423.

Google Scholar