Paper Titles
Liquid Phase Sintering Behavior of Amorphous Nano-Sized Silicon Nitride Powders
p.1069
Microwave Sintering of Alumina-Silicon Carbide Nanocomposites
p.1072
Fabrication and Characterization of Porous TiB2 Ceramic with Three-Dimensional Interconnected Skeleton
p.1076
Synthesis of a Novel B3CN3 Compound by Pyrolysis of Precursor
p.1080
The Effect of Diluent on Combustion Synthesis of Si3N4-SiC-TiN Ceramics with Small Diameter
p.1084
Preparation of Porous Si3N4 Based Ceramics by Combustion Synthesis
p.1087
Low Temperature Fabrication and Characterization of Porous SiC Ceramics Using Polycarbosilane as Binder
p.1090
Processing and Characterization of Carbothermal Reduction and Nitridation from Kaolinite-Polyacrylamide Intercalation Compound
p.1093
Fabrication of Reticulated Porous Ceramics with Controlled Structure by Centrifuging Process
p.1096

The Effect of Diluent on Combustion Synthesis of Si3N4-SiC-TiN Ceramics with Small Diameter

Article Preview

Abstract:

Si3N4-TiN-SiC multiphase ceramics was synthesized from TiSi2 and SiC powders by combustion synthesis. The effect of dilute content on conversion percentage was calculated in theory assuming that there is no penetration of nitrogen gas, and combustion synthesis was carried under different conditions. The results show that the increase of diluent content in certain extent is helpful for nitrification of TiSi2 and free silicon were detected in the 30wt% and 40wt% SiC-diluted samples with 45vol% porosity while no silicon were found in 50vol% porosity green parts. The increase in diluent content and porosity of the compacts are favorable for the development of rod-like β-Si3N4 and the long-diameter ratio of β-Si3N4 is increase as the increase of these two values.

You might also be interested in these eBooks
High-Performance Ceramics IV View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 336-338)

Pages:

1084-1086

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.336-338.1084

Citation:

Cite this paper

Online since:

April 2007

Authors:

Xue Jun Zhang, Yong Ting Zheng, Jie Cai Han

Keywords:

Combustion Synthesis (CS), Diluent, Si3N4-TiN-SiC

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2007 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] J. H. Dai, J. B. Li, Y. J. Chen, L. Yang: J. Eur. Ceram. Soc. Vol. 23 (2003), p.1543.

Google Scholar

[2] W. B. He, B. L. Zhang, H. R. Zhuang, W. L. Li: Ceram. Inter. Vol. 30 (2004), p.2211.

Google Scholar

[3] M. Singh: Scripta Materialia Vol. 34 (1996), p.923.

Google Scholar

[4] J. C. Han, G. Q. Chen, S. Y. Du, J. V. Wood: J. Eur. Ceram. Soc. Vol. 20 (2000), p.927.

Google Scholar

[5] C. L. Yeh, H. C. Chuang, E. W. Liu, Y. C. Chang: Ceramics International Vol. 31 (2005), p.95.

Google Scholar

[6] C. L. Yeh, H. C. Chuang: Ceram. Inter. Vol. 30 (2004), p.733. Fig. 3 SEM micrographs of combustion products obtained from different diluent content materials (a) 30% (b) 40% (c) 50% (d) Whisker.

Google Scholar