Paper Titles
Degradation Behaviour of Metallic Biomaterials for Degradable Stents
p.113
Evaluation of the Adhesion of Ultra-Thin Teflon-Like Films Deposited by Plasma on 316L Stainless Steel for Long-Term Stable Drug-Eluting Stents
p.119
A New Technique of Titanium and Segmented Polyurethane Complex through 3-(Trimethoxysilyl) Propylmethacrylate for Artificial Implants
p.125
Selective Oxidation during the Austenitic Annealing of a CMnSi Steel
p.129
Microstructure and Properties of Laser Fused Nickel Based Self Fluxing Alloy Coating
p.135
Micro- and Nanoscaled Titanium Surface Structures Textured by Electrolytic Plasma and Etching Methods
p.141
Low Temperature Crystallization and Structural Modification of Plasma-Sprayed Hydroxyapatite Coating with Hydrothermal Treatment
p.147
Microstrain Determination in Individual Grains of Laser Deposited Cladding Layers
p.153
Analysis of the Intermetallic Compound Formed in Hot Dip Aluminized Steel
p.159

Microstructure and Properties of Laser Fused Nickel Based Self Fluxing Alloy Coating

Article Preview

Abstract:

The thermal sprayed coatings are widely used in waste incineration boilers and fossil fuel-fired boilers. However, the defects, such as porosity, cracks and unmelted particles, in these coatings are detrimental to corrosion performance. In this study, the nickel based self fluxing alloy coating was fused by YAG laser to improve performance of the coating. Under appropriate laser parameters, the nonporous, crack-free coating was produced. The rubber wheel type abrasion wear test and hot corrosion test conducted in the presence of a mixed salt of Na2SO4/NaCl/KCl at 650°C showed that the modified coating exhibited excellent wear and corrosion resistances compared with the as sprayed and gas fused coatings.

You might also be interested in these eBooks
THERMEC 2006 Supplement View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 15-17)

Pages:

135-140

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.15-17.135

Citation:

Cite this paper

Online since:

February 2006

Authors:

Yu Li, Kazumasa Nishio, Mitsuaki Katoh, Tomiko Yamaguchi

Keywords:

Hot Corrosion, Laser Fusing, Ni-Cr-Si-B, Sprayed Coatings, Wear

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2007 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] Y. Kawahara: Mater. High Temp., 14(3) (1997), P261-268.

Google Scholar

[2] Masayuki Yoshiba, Waste Management Research, Vol. 13, No. 1 (2002), P38.

Google Scholar

[3] E.J. Morgan-Warren: Welding Met. Fabric., January/February (1992), P25-31.

Google Scholar

[4] E.P. Latham, D.B. Meadowcroft, L. Pinder, Materials Science and Technology, 5 (1989), P 813.

Google Scholar

[5] W.M. Steen, Laser Material Processing, 1st ed., (Springer-Verlag, London 1996).

Google Scholar

[6] N. Suzuki, corrosion·corrosion prevention handbook (Maruzen publisher, Japan 2000). 0 50 100 150 200 As sprayed Gas fusing Laser fusing Corrosion depth (μm) Na2SO4: NaCl: KCl=1: 1: 1 (molar ratio) 650℃　24h Local corrosion General corrosion Fig. 11 The results of corrosion test Fig. 12 Local corrosion of gas fused coating.

DOI: 10.1016/j.corsci.2022.110247

Google Scholar