Paper Titles
Experimental Study on High Speed Milling of γ-TiAl Alloy
p.6
Fine ELID Grinding on the Symmetric Paraboloidal Mirror of Quartz
p.11
Computerized Tomography and C-Scan for Measuring Drilling-Induced Delamination in Composite Material Using Twist Drill and Core Drill
p.16
Spinning- Inflated-Ballonet Polishing Tool and its Application in Curved Surface Polishing
p.21
Study to Enhance the Precision of Micro-EDM
p.26
A Micro-Deposition Method by Using EDM
p.32
A Vacuum-Compatible Air Bearing: Design Analysis and Optimization
p.37
A Study on the Grinding Temperature Field for Titanium Alloy
p.45
Influence of Magnetic Field Distribution on ECM Process
p.50

Study to Enhance the Precision of Micro-EDM

Article Preview

Abstract:

Considering the key technologies to enhance the accuracy of micro-EDM, a micro-EDM system and some techniques are researched. In this system, a micro-energy pulse power supply whose open voltage and capacitance can be adjusted is developed. The detection and control subsystem of the machining process is designed and applied. A simple method of machining high precision microelectrodes is adopted. The forming mechanism of the gap in EDM process is analyzed theoretically. The processing experiments are carried out on the system, and the results basically coincide with the theoretical analysis. The experimental results of machining microelectrodes and micro holes show that the Ø4.5±0.5μm microelectrodes can be ground, and the Ø6±2.0μm micro holes can be drilled.

You might also be interested in these eBooks
Progress of Precision Engineering and Nano Technology View Preview

Info:

Periodical:

Key Engineering Materials (Volume 339)

Pages:

26-31

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.339.26

Citation:

Cite this paper

Online since:

May 2007

Authors:

Bao Xian Jia, Wan Sheng Zhao, Zhen Long Wang, Fu Qiang Hu

Keywords:

Electric Discharge Machining (EDM), Machining Precision, Micro Machining

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2007 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] T. Masuzawa, M. Fujino and K. Kobayashi: Ann. CIRP, Vol. 34 (1985) No. 1, p.431.

Google Scholar

[2] T. Masaki, K. Kawata and T. Masuzawa: IEEE (1990), pp.21-26.

Google Scholar

[3] Z.Y. Yu, T. Masuzawa and M. Fujino: Ann. CIRP, Vol. 47 (1998) No. 1, p.169.

Google Scholar

[4] W.S. Zhao, Y. Zhang and Z.L. Wang: Key Eng. Mater, Vol. 259-260 (2004), p.567.

Google Scholar

[5] W.Z. Li: Research on micro-EDM system and related techniques (Ph.D. dissertation. Harbin Institute of Technology, China 2002).

Google Scholar

[6] W.S. Zhao, B.X. Jia, Z.L. Wang and F.Q. Hu: Key Eng. Mater, Vol. 304-305 (2006), p.201.

Google Scholar