Paper Titles
Hybrid Tooling Using High Speed Cutting and Ceramic Filled SLA (StereoLithography Apparatuses) Technologies
p.351
Identification of Phases in the Wide-Gap Region Brazed with BNi-3 Filler Metal Powder Using Electron Backscatter Diffraction
p.355
Influence of Interlayer on the Corrosion Behavior of Multilayered WC-Ti1-xAlxN Coatings in Deaerated 3.5% Sodium Chloride Solution
p.359
Influence of Particles on Cell Structure of Al-Mg Alloys Foamed by Melt Foaming Method
p.363
Influence of Process Parameters on the Adhesive Strength of CrN Coatings
p.367
Influence of Reheating Profile on Microstructural Evolution of 2024 Al Wrought Alloy for Thixoextrusion
p.371
Influence of the Ball Diameter, Material and Taper Design on Transferred Stresses of Ceramic THR
p.375
Influence of Zircon Addition on Thermal Shock Resistance of ZTA for Plasma Reactors
p.379
In-Situ Joining of Combustion Synthesized Ni3Al Intermetallic Compounds with AZ91D Mg Alloy
p.383

Influence of Process Parameters on the Adhesive Strength of CrN Coatings

Article Preview

Abstract:

In order to enhance the corrosion and wear resistance of the STVAX alloy, the CrN film has been deposited by UBM(unbalanced magnetron) sputtering. In this study, the influence of process parameters, such as N2 gas concentration and Cr interlayer insertion, on the adhesive strength was investigated. By increasing the concentration of N2 gas from 30% to 33%, the microstructure of the coating layer was changed from hexagonal Cr2N to cubic CrN. By increasing N2 gas concentration to 38%, a CrN coating layer with a preferred orientation of <111> plane was formed. Nanoindentation testing showed that the mechanical properties of coatings varied according to the coating type and crystallographic orientation. Superior adhesive strength was obtained at the of N2 gas concentration of 38%, and higher hardness at 33% concentration. The adhesive strength of the coating film was higher with a Cr interlayer than that without. These findings showed that the Cr interlayer between the CrN coating and the STAVAX substrate significantly improved the adhesive strength of coating to the substrate.

You might also be interested in these eBooks
Eco-Materials Processing and Design VIII View Preview

Info:

Periodical:

Materials Science Forum (Volumes 544-545)

Pages:

367-370

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.544-545.367

Citation:

Cite this paper

Online since:

May 2007

Authors:

G.C. Jeong, Il Ho Kim, S.I. Kwun

Keywords:

Adhesive Strength, Cr Interlayer, CrN Coating, STAVAX

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2007 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] S. H. Yao and Y. L. Su : Wear, Vol. 212 (1997), p.85.

Google Scholar

[2] Y. L. Su, S. H. Yao, Z. L. Leu, C. S. We and C. T. Wu : Wear, Vol. 213 (1997), p.165.

Google Scholar

[3] M. Cekada, P. Panjan, M. Macek and P. Smid : Surface & Coatings Tech., Vol. 151-152 (2002), p.31.

Google Scholar

[4] S. K. Pradhan, C. Nouveau, A. Vasin and M. A. Djouadi : Surface & Coatings Tech., Vol. 200 (2005), p.141.

Google Scholar

[5] M. Pakala and R. Y. Liu : Surface & Coatings Tech., Vol. 81 (1996), p.233.

Google Scholar

[6] X. C. Zhang, B. S. Xu, H. D. Wang, Y. Jiang and Y. X. Wu : Composites Sci. & Tech., Vol. 66 (2006), p.2249.

Google Scholar

[7] G. Li, P. Deshpande, J. H. Li and R. Y. Lin : Tsinghua Science and Technology, Vol. 10 (2005), p.690 Fig. 5 Changes of the adhesive strength with N2 concentration and Cr interlayer insertion. (a) various N2 concentrations, (b) Cr interlayer.

Google Scholar