Paper Titles
Effect of Applied External Stress on Hydrogen Desorption from Metal Hydrides
p.217
Elastic Properties of L10-Ordered Single Crystals
p.221
Microstructure Evolution during Lithiation and Delithiation of Ni3Sn2 Anode for Lithium Secondary Batteries
p.225
Crystal Structure Variation of Ru2Si3 Upon Alloying with Mn
p.229
Creep Deformation and Microstructure of Alloy 617 Foil at High Temperature
p.233
Fabrication of Textured SrBi2Nb2O9 Ceramics by Templated Grain Growth
p.239
Study on the Properties of Doped La in BaBi4Ti4O15 Ceramic
p.243
Characterization of Bismuth Titanate Powders
p.247
In Situ Synthesis of TiB2-TiCx Ceramic Matrix Composites by Hot Isostatic Pressing
p.251

Creep Deformation and Microstructure of Alloy 617 Foil at High Temperature

Article Preview

Abstract:

The present paper reports the results of microcreep tests and microstructure of alloy 617 foils of 100μm thick specimens at 800 and 900 oC in air. Before each test, the specimens were annealed in vacuum at 950 oC for 17 hrs. The dynamic recrystallizations were observed during creep test. The voids and cracks were observed along grain boundaries. The maximum elongation of grains was found at the lowest applied stress along the loading direction. The average grain size decreases from 20 μm to 2 μm as applied stress increases from 48 to 120 MPa at 800 oC and from 50 μm to 5 μm as the applied stress increases from 35 to 60MPa at 900 oC. The steady state creep rates were increased as applied stress increased in all the specimens.

You might also be interested in these eBooks
Advanced Materials and Processing View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 26-28)

Pages:

233-236

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.26-28.233

Citation:

Cite this paper

Online since:

October 2007

Authors:

S.K. Sharma, Jin Won Choi, K.J. Kang

Keywords:

Alloy 617, Creep Rupture, Dynamic Recrystallization (DRX), Foil Specimens, Grain Size

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2007 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] J. Huo, J.T. Gou, L.Z. Zhou, X.Z. Qin and G.S. Lee: J. Mater. Engg. Perform. Vol. 16 (2007), p.55.

Google Scholar

[2] A.R. Lbanez, A. Saxena and J.D. Kang: Strength Fract. Complex. Vol. 4 (2006), p.75.

Google Scholar

[3] S. A. Sajjadi and S. Nategh, Mat. Sci. Engg. A, 307 (2001) 158.

Google Scholar

[4] D.J. Lee, D.J. Kim and C.H. Jang, Proceedings of ICAPP, 2007, Nice, France, May 13-18, p.419.

Google Scholar

[5] F.M.O. Ben, N. Kasik, B. Ilschner and F.R. Aria: Mater. Mat. Trans. A Vol. 30 (1999), p.981.

Google Scholar

[6] Information on http: /www. specialmetals. com.

Google Scholar

[7] A. Kewther, B.S. Yilbas and M.S.J. Hashmi: J. Mater. Engg. Perform. Vol. 10 (2001), p.108.

Google Scholar

[8] M. A. Kewther, B.S. Yilbas and M.S.J. Hashmi: Indust. Lub. Tri. Vol. 53 (2001), p.112.

Google Scholar

[9] M.K. Ali, M.S.J. Hashmi and B.S. Yilbas: J. Mater. Proc. Tech. Vol. 118 (2001), p.45.

Google Scholar

[10] D. Allen, J.P. Keustermans, S. Gijbels and V. Bicego: Mater. High Temp. Vol. 21 2004), p.55.

Google Scholar

[11] M. Tamura, H. Esaka and K. Shinozuka: ISIJ International Vol. 39 (1999), p.380.

Google Scholar

[12] M. Tanaka, Y. Ito, R. Kato and A. Kayama: J. Mater. Sci. Lett. Vol. 19 (2000), p.899.

Google Scholar