Paper Titles
Finite Element Analysis of Dynamic Characteristics of High-Speed Motorized Spindle
p.900
Analyze of Clamp Rod on Spring Tube Stiffness Measurement
p.905
Dynamic Balance Analysis of Drum-Shape Rotor
p.909
The Investigations of Tool Wear and Wear Mechanism with Water Vapor as Coolants and Lubricants in Green Cutting
p.913
Simulation Study on Spool Edge’s Round Angle Effects on Spool Valve Orifice Discharge Characteristic
p.918
Three-Dimensional Finite Element Analysis on Precision Cutting for Tool with Nose Radius Considering Tool Edge Radius
p.923
Emissivity Calibration and Research of Infrared Image Processing in the Cutting Temperature Test
p.928
Grey Theory Approach to Sequential Turbocharged Diesel Engine
p.934
Dynamic Stress Intensity Factor with Griffith – II Type Crack in Vibratory Machining and its Influence on Chip Formation
p.939

Simulation Study on Spool Edge’s Round Angle Effects on Spool Valve Orifice Discharge Characteristic

Article Preview

Abstract:

This paper deals with the effect on orifice discharge characteristic by the round angle of electro-hydraulic servo valve spool metering edge. The machining method of spool metering edge can cause micro round angle on the edge. This paper firstly provides 3D geometry model and computational grids of spool valve where the round angle’s range is 0-10μm and orifice opening is 0-40μm. Secondly calculates the flow rate of the orifice on the constant differential pressure circumstances. The numerical analysis is performed by using the commercial code ‘‘Fluent’’, and the numerical results show the complete flow field inside the valve. The analysis result is to obtain the influence of round angle on discharge characteristic, quantitatively. An experimental result is used in this paper to evaluate and validate the numerical analysis of the valve. The aim of this analysis is to provide a designation reference of the spool valves which are important parts of servo valve.

You might also be interested in these eBooks
e-Engineering & Digital Enterprise Technology View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 10-12)

Pages:

918-922

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.10-12.918

Citation:

Cite this paper

Online since:

December 2007

Authors:

Xu Dong Pan, Guang Lin Wang, L. Zhang

Keywords:

Discharge Characteristics, Numerical Simulation, Round Angle, Spool Valve

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2008 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] G.L. Wang, X.D. Pan, D.X. Shao and Z.S. Lu: Key Engineering Materials, Vol. 315-316(July 2006), pp.249-253.

Google Scholar

[2] G.L. Wang, C.D. Tao, D.X. Shao and D.W. Chen: Journal of Harbin Institute of Technology, Vol. 31(5) (1999), pp.120-122 (in Chinese).

Google Scholar

[3] G.L. Wang: PhD Dissertation, Harbin institute of technology (2000), pp.17-24(in Chinese).

Google Scholar

[4] R. Amirante, P.G. Moscatelli and L.A. Catalano. Energy Conversion and Management, Vol. 48 (2007), pp.942-953.

Google Scholar

[5] G.D. Vescovo and A. Lippolis: Proceedings of 2nd FPN PhD international symposium, Modena, July 3-6, (2002).

Google Scholar

[6] R. Amirante, G. Del Vescovo and A. Lippolis: Energy Conversion and Management, Vol. 47 (2006), pp.1748-1760.

Google Scholar