Paper Titles
Development of Vitrified Bond CBN Wheel for Internal Precision Grinding of the Air-Conditioner Compressor Piston Hole
p.29
Energy Model in Laser Processing of a Cylindrical Grinding Wheel
p.33
Resin Bonded CBN Grinding Wheel Dressing by Laser — Simulation and Experiment
p.38
Machining Performance of Brazed Diamond Wire Saw with Optimum Grain Distribution
p.43
Ti Coating of Nanocrystalline Diamond by Atomic Layer Deposition
p.48
Technique and Application about Diamond Dressing Roller
p.52
Fabrication of Accurate Diamond - Metal Composite Cutting Blade by Electrotyping Method
p.57
Ultrasonic Dressing of Grinding Wheel and Its Influence on Grinding Quality
p.62
A Study on the Methods for Precise Sorting of Synthetic Diamond Abrasives
p.66

Ti Coating of Nanocrystalline Diamond by Atomic Layer Deposition

Article Preview

Abstract:

Nanocrystalline diamond compact possesses not only the advantageous performance of polycrystalline diamond but also the high strength and the high toughness of nano-ceramics. However, single-phase nanocrystalline diamond compact is very difficult to sinter because of a huge amount of oxygen-containing and nitrogen-containing functional groups absorbed on the surface of nanocrystalline diamond. In this paper, atomic layer deposition (ALD) method has been used to coat nanocrystalline diamond with titanium, which will promote the bonding of nanocrystalline diamond as the bond in polycrystalline diamond. In vacuum, the H2 and TiCl4 reactants were employed alternately in an ABAB… binary reaction sequence to achieve Ti layer, which reacted with diamond matrix and formed TiC in the coating, realizing strong chemical bonding between the coating and the diamond. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were utilized to study the structure and the morphology of the coating. The results confirmed the formation of titanium carbide at the depositing temperature 500°C. The darker spots and strips observed on nanocrystalline diamond particles by TEM were proved to be TiC and the nucleation and subsequent growth of TiC preferentially occurred in the defects as twin zones and dislocation areas on diamond surfaces.

You might also be interested in these eBooks
Advances in Grinding and Abrasive Technology XIII View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 304-305)

Pages:

48-51

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.304-305.48

Citation:

Cite this paper

Online since:

February 2006

Authors:

Jian Bing Zang, Jing Lu, Yan Hui Wang, X.H. Qi, Yun Gang Yuan

Keywords:

Atomic Layer Deposition ALD, Coating, Nanocrystalline Diamond, TiC

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2006 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] R.H. Wentorf, R.C. Devries and F.P. Bundy: Science, Vol. 208 (1980), pp.873-880.

Google Scholar

[2] P.L. Tso and Y.G. Liu: International Journal of Machine Tools & Manufacture, Vol. 42 (2002), pp.331-334.

Google Scholar

[3] O.K. Semchinova, J. Graul, H. Neff, G. Holzhüter, E.P. Smirnov and V.Y. Davydov: Diamond and Related Materials, Vol. 8 (1999), pp.2140-2147.

DOI: 10.1016/s0925-9635(99)00180-6

Google Scholar

[4] S.A. Catledge, Y.K. Vohra, R. Ladi and G. Rai: Diamond and Related Materials, Vol. 5 (1996), pp.1159-1165.

DOI: 10.1016/0925-9635(96)00534-1

Google Scholar

[5] Q.S. Bai, Y.X. Yao, P. Bex and G. Zhang: International Journal of Refractory Metals & Hard Materials, Vol. 22 (2004), pp.111-115.

Google Scholar

[6] M. Leskelä and M. Ritala: Thin Solid Films, Vol. 409 (2002), pp.138-146.

Google Scholar

[7] J.B. Zang, Y.H. Wang, X.H. Zhang, M.Z. Wang and Y.Z. Zheng: Key Engineering Materials, Vol. 250 (2003), pp.78-82. 50 nm 50 nm.

Google Scholar