Paper Titles
Contour Controller Design for Two-Dimensional Stage System with Friction
p.1267
Prediction of Critical Blank-Holding Force Criterion to Prevent Wrinkles in Axi-Symmetric Cup Drawing
p.1273
A 3D Slab Method in Cold Strip Rolling
p.1279
Modelling of Friction Coefficient in Cold Strip Rolling
p.1285
Modelling of the Development of Initial Crack under Hot Rolling Condition
p.1291
Convolute Cut-Edge Design with a New Anisotropic Yield Function for Earless Target Cup in a Circular Cup Drawing
p.1297
An Upper Bound Solution for Upsetting of Two-Layer Cylinder
p.1303
A Study on Rotating Compression Forming of Ring Based on the Upper Bound Method
p.1309
Influence of Casting Speed on Temperature and Flow Fields in Molten Pool during Twin-Roll Strip Casting Process
p.1315

Modelling of the Development of Initial Crack under Hot Rolling Condition

Article Preview

Abstract:

An oxide scale layer is formed on the steel strip surface due to the high temperature (850-1100 °C) of the strip in hot rolling. The oxide scale layer may not be continuous because of the defects such as void existing in the layer before the strip enters the roll bite. The non-zero cracks may therefore be formed on the oxide scale layer, especially, when the oxide scale layer is relatively thick. These cracks may become narrower (even become closed) or wider (even form steel substrate extrusion) after hot rolling deformation. The development of the crack depends on the materials flow in the hot rolling process. The shape of the profile of the oxide scale layer has a significant effect on the materials flow in hot rolling process so it is important to investigate the effect of the oxide scale profile on the propagation of the crack. In this paper, the authors used the FEM method to simulate the crack propagation in oxide scale under hot rolling conditions for different profile parameters of the oxide scale layer. Simulation results indicate that the larger is the initial profiles surface roughness, the larger the crack width remained after rolling. With a rough profile and large initial crack width, the steel substrate extrusion may be formed.

You might also be interested in these eBooks
Progress on Advanced Manufacture for Micro/Nano Technology 2005 View Preview

Info:

Periodical:

Materials Science Forum (Volumes 505-507)

Pages:

1291-1296

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.505-507.1291

Citation:

Cite this paper

Online since:

January 2006

Authors:

Jian Ning Tang, A. Kiet Tieu, Zheng Yi Jiang

Keywords:

Crack, Finite Element Model (FEM), Hot Rolling, Modeling, Oxide Scale

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2006 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] Tang, J., Tieu, A. K. and Jiang, Z., Proceedings of ICTP 2005, Verona, Italy (under review).

Google Scholar

[2] Fletcher, J.D., Talamantes-Silva, J. and Beynon, J.H., Modelling of Metal Processes: Symposium 8, Control of External Product Properties, The Institue of Materials, London, UK. (1998).

Google Scholar

[3] Krzyzanowski, M., Suwanpinij, P. and Beynon, J.H., Proceedings of NUMIFORM 2004, USA, p. (1961).

Google Scholar

[4] Sun, W., Tieu, A.K., Jiang, Z., Lu, C. and Zhu, H., J. of Materials Processing Technology, 140 (2003), p.76.

Google Scholar

[5] Tang, J., Tieu, A.K. and Jiang, Z., Key Engineering Materials Vols. 274-276 (2004), p.499.

Google Scholar

[6] Tang, J., Tieu, A.K., Jiang, Z. and Sun, W., Proceedings of EMAC (2003), Australia, p.283.

Google Scholar

[7] Roberts, W.L., Hot Rolling of Steel. (Marcel Dekker Inc. New York, USA 1983).

Google Scholar

[8] Krzyzanowski, M., and Beynon, Steel Reseach vol. 70, 22 (1999).

Google Scholar

[9] Echsler, H., Ito, S. and Schutze, M., Oxidation of Metals vol. 60 (2003), p.241.

Google Scholar