Paper Titles
Influence of Alloying Additions on Enhancement of Soft Magnetic Properties Effect and Crystallization in FeXSiB (X=Cu, V, Co, Zr, Nb) Amorphous Alloys
p.171
TEM Investigations of Electron 21 Magnesium Alloy
p.175
Structural Studies of Metallic Powders Fe-Al-X (X= Fe, Ni, Cu, Cr) Type Obtained by the Self-Decomposition Method and Electro-Magneto-Mechanical Grinding
p.181
Mössbauer and XRD Studies on Composite Powder with Phases from Fe-Al System Obtained by Mechanically Activated SHS Mehtod
p.185
Bulk Nanostructured Al-Si-Ni-Mishmetal Alloys Produced by High-Pressure Hot Compaction
p.189
The Influence of Aluminium Addition on the Microstructure of Zinc Pack Coatings
p.193
Long Range Ordering in Spin Crossover Compounds
p.199
Structure Analysis of Nanocrystalline MgO Aerogel Prepared by Sol-Gel Method
p.203
A Comparative Study of the Structure and Properties of Zinc Coatings Deposited with Various Methods
p.207

Bulk Nanostructured Al-Si-Ni-Mishmetal Alloys Produced by High-Pressure Hot Compaction

Article Preview

Abstract:

Nanocrystalline Al-based alloys containing silicon (Si), rare earth metal (RE) and late transition metal (Ni), combine high tensile strength and good wear resistance. The aim of this work was to manufacture high strength bulk nanocrystalline alloys from Al-Si-Ni-Mm system. Bulk nanostructured alloys were produced by ball-milling of nanocrystalline ribbons followed by high-pressure (7.7 GPa) hot compaction (320°C). Nanocrystalline ribbons of investigated alloys were produced by melt-spinning technique. The crystallization process was studied using differential scanning calorimeter. The phase compositions of the ribbons were characterized by X-ray diffraction, scanning and transmission electron microscopy. Vickers hardness of nanostructured compacted samples, measured with the load of 1 kG, achieved values five times higher than that of commercial 4xxx series Al alloy.

You might also be interested in these eBooks
APPLIED CRYSTALLOGRAPHY XX View Preview

Info:

Periodical:

Solid State Phenomena (Volume 130)

Pages:

189-192

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.130.189

Citation:

Cite this paper

Online since:

December 2007

Authors:

Grzegorz Cieślak, Jerzy Latuch, Tadeusz Kulik

Keywords:

High Pressure Hot Compaction, Nanocrystalline Al-Si Alloys, Rapid Solidification

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2007 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] J.Q. Guo, K. Kita, N.S. Kazama, J. Nagahora, K. Ohtera, Mat. Sci. Eng. A 203 (1995)420.

Google Scholar

[2] K.I. Moon, K.S. Lee. J. All. Comp. 291 (1999) 312.

Google Scholar

[3] S.J. Hong, B.S. Chun. Mat. Sci. Eng. A348 (2003) 262.

Google Scholar

[4] Y. Kawamura, H. Mano, A. Inoue, Scripta Mater. 44 (2001) 1599.

Google Scholar

[5] I. Börner, J. Eckert, Scripta Mater. 45 (2001) 237.

Google Scholar

[6] A.R. Yavari, W.J. Botta Filho, C. Rodrigues, C. Cardoso, R.Z. Valiev. Scripta Mater. 46 (2002) 711.

Google Scholar

[7] Y. Kawamura, A. Inoue, K. Sasamori, T. Masumoto, Scripta Metall. 29 (1993) 275.

Google Scholar

[8] T.H. Lee, Y. Kawamura, A. Inoue, S.S. Cho, T. Masumoto, Scripta Metall. 36 (1997) 475 Alloy a [nm] d [nm] HV Tn [o C] Bulk alloy A 0, 4029 10-20 320 270 Bulk alloy B 0, 4056 15-30 330 270 4xxx series Al alloy - - 60.

Google Scholar