Paper Titles
Analysis of the Polymer Coatings of Coronary Stents from the Aspect of Drug Absorbing and Eluting
p.245
Effect of Crucible Diameter and Wall Roughness on the Melt Flow Generated by Rotating Magnetic Field
p.251
Production of Polymer Nanofibers Containing Hydroxyapatite by Electrospinning
p.257
Production of Single Crystal Thermoelectric Bismuth Telluride Alloys
p.263
Dynamic Mechanical Tests on Magnesium Catalyzed Cast Polyamide 6 Composites Having Different Additives
p.269
Investigation of the Influence of Surface Strengthening Technology on the Material of Railway Car Wheel Axles
p.277
Stent Retention Measurement
p.283
Measuring of Equibiaxial Tension of Rubber-Like Materials by Optical Method
p.289
Qualitative and Quantitative Analysis of Boron Content Precipitates by FEG-SEM and EDS Methods
p.295

Dynamic Mechanical Tests on Magnesium Catalyzed Cast Polyamide 6 Composites Having Different Additives

Article Preview

Abstract:

Due to the effect of graphite and montmorrilonit additives, the impact strenght slightly decreases, but by the influence of softening material, the value of impact strength can be three times more than the pure PA6. It is determined that graphite can be added until 3%, montmorrilonit can be added until 6% and softening material can be added until 15% to the base matrix. These samples give basis for special characteristics examinations.

You might also be interested in these eBooks
Materials Science, Testing and Informatics V View Preview

Info:

Periodical:

Materials Science Forum (Volume 659)

Pages:

269-275

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.659.269

Citation:

Cite this paper

Online since:

September 2010

Authors:

Mátyás Andó, Gábor Kalácska, Tibor Czigány

Keywords:

Cast Polyamide 6, Graphite, Montmorillonite, Nylon, Softening Additive

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2010 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] M. Jaklewicz, A. Litak, M. Ostoja-Starzewski: Friction and scratch resistance of polyamide 6 modified with ionomeric ethylene/methacrylic acid copolymer. Journal of Applied Polymer Science Vol. 91 (2004) pp.3866-3870.

DOI: 10.1002/app.13587

Google Scholar

[2] G. Rusu, E. Rusu. In situ nylon 6/graphite composites. Physico-mechanical properties. Journal of Optoelectronics and Advanced Materials Vol. 9 (2007) pp.2102-2109.

Google Scholar

[3] H.Y. Xu, Z.Z. Feng, J.M. Chen, H. D Zhou. Tribological behavior of the polyamide composite coating filled with different fillers under dry sliding. Journal of Applied Polymer Science; 104 (2007) pp.2554-2560.

DOI: 10.1002/app.24344

Google Scholar

[4] Kalácska G.: Engineering polymers and composites in the mechanical engineering practice (in Hungarian). Gödöllő: 3C-Grafika Kft. (2007).

Google Scholar

[5] R. Gächter, H. Müller: Plastics Additives. Munich: Hanser Publishers (1990).

Google Scholar

[6] I. Novák, I. Krupa: Electro-conductive resins filled with graphite for casting applications. European Polymer Journal Vol. 40 (2004) pp.1417-1422.

DOI: 10.1016/j.eurpolymj.2004.01.033

Google Scholar

[7] V.K. Piddubnyi, I.M. Zin, B.M. Lavryshyn, L.M. Bilyi, Y.I. Kolodii, M.B. Ratushna: Effect of carbon-containing conducting fillers on the properties of epoxy coatings. Materials Science Vol. 41 (2005) pp.265-270.

DOI: 10.1007/s11003-005-0160-4

Google Scholar

[8] J.H. Li, L.L. Feng, Z.X. Jia: Preparation of expanded graphite with 160 µm mesh of fine flake graphite. Materials Letters Vol. 60 (2005) pp.746-749.

DOI: 10.1016/j.matlet.2005.10.004

Google Scholar

[9] P. Potschke, L. Haussler, S. Pegel, R. Steinberger, G. Scholz: Thermoplastic polyurethane filled with carbon nanotubes for electrical dissipative and conductive applications. KGKKautschuk Gummi Kunststoffe Vol. 60 (2007) pp.432-437.

Google Scholar

[10] R.S. Plentz, S.M.B. Nachtigall: Effect of a macromolecular coupling agent on the properties of aluminium hydroxide/PP composites. Journal of Applied Polymer Science Vol. 101. (2006) pp.1799-1805.

DOI: 10.1002/app.23558

Google Scholar

[11] W. Dong, X. Zhang, Y. Liu, Q, Wang, H. Gui, J. Gao, Z. Song, J. Lai, F. Huang, J. Qiao: Flame retardant nanocomposites of polyamide 6/clay/silicone rubber with high toughness and good flowability. Polymer; Vol. 47 (2006), pp.6874-6879.

DOI: 10.1016/j.polymer.2006.07.038

Google Scholar

[12] B.N. Jang, C.A. Wilkie: The effect of clay on the thermal degradation of polyamide 6 in polyamide 6/clay nanocomposites. Polymer Vol. 46 (2006) pp.3264-3274.

DOI: 10.1016/j.polymer.2005.02.078

Google Scholar

[13] W.S. Chow, Z.A. Mohd Ishak: Mechanical, morphological and rheological properties of polyamide 6/organo-montmorillonite nanocomposites. eXPRESS Polymer Letters; Vol. 1 (2007), pp.77-83.

DOI: 10.3144/expresspolymlett.2007.14

Google Scholar