Paper Title:
Finite Element Simulation of Surface Roughness of an Al-5052 Plate Processed by Shot Peening
  Abstract

The evolution of surface roughness of Al-5052 plate subjected to shot peening was simulated by means of LS-DYNA, and the influences of variation of parameters, such as the size of shot, the velocity of shot, the density of shot, strength coefficient, strain hardening exponent, friction coefficient and incident angle, were investigated. Moreover, the effect of space ratio of two shots was also studied. The simulated results, analytical results and experimental results were compared, and the results showed that the simulated results were agreement with experimental results and analytical results, that the important roles played by the shot size and shot velocity, but to a much lesser extent by the other parameters.

  Info
Periodical
Chapter
Chapter 2: Fundamental Materials Science
Edited by
Yongping Zhang, Linhua Zhou and Elwin Mao
Pages
136-140
DOI
10.4028/www.scientific.net/AMM.109.136
Citation
J. X. Lan, M. L. Wang, Y. H. Wang, X. J. Shen, "Finite Element Simulation of Surface Roughness of an Al-5052 Plate Processed by Shot Peening", Applied Mechanics and Materials, Vol. 109, pp. 136-140, 2012
Online since
October 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: B.J. Xiao, Cheng Yong Wang, Ying Ning Hu, Yue Xian Song
Abstract:A two-dimensional orthogonal thermal-mechanical finite element model by Deform2D finite element analysis software is established in the...
590
Authors: Hong Rui Ao, Deng Pan, Hong Yuan Jiang
Thin Films
Abstract:The contact at head/disk interface in hard disk drives subject to an external shock has been studied using the finite element method. A rigid...
2339
Authors: Ji Cai Kuai
Chapter 3: Chemical and Biomedical Engineering
Abstract:The dynamic minimum thickness of cut for the ultra-precision machining surface quality is important influence. Between tool and the workpiece...
1246
Authors: Chang Jiang Wang, Diane J Mynors, Tarsem Sihra
Chapter 15: Materials Processing Technology
Abstract:Presented here is the simulation of uniaxial stretch forming using two punches in a sheet metal forming operation. In the finite element...
2002
Authors: Xin Wu Ma, Guo Qun Zhao, Wen Juan Li
Chapter 5: Materials Processing and Chemical Technologies
Abstract:A new method for determination of friction coefficient in sheet metal forming of Mg alloy AZ31B is presented in this paper. The method is...
430