Paper Title:
Roll Casting of Recycled AA5182
  Abstract

Roll casting of the model alloy of recycled AA5182 aluminum alloy was investigated. Fe up to 0.6% was added to the AA5182 to make the model alloys of recycled AA5182. Increase of 0.6% of Fe means that the recycle was three times operated. A vertical type high speed twin roll caster was used. Some devices were operated on the twin roll caster to increase the cooling rate in order to make impurity fine. The roll speed could be increased up to 80m/min. The roll-castability did not become worse by the addition of the Fe. The LDR (limiting Drawing Ratio) was 1.9 when the Fe addition was 0.6. The deterioration of the mechanical properties by the addition of impurity Fe was very small.

  Info
Periodical
Chapter
Chapter 8: System Modeling and Simulation
Edited by
Dongye Sun, Wen-Pei Sung and Ran Chen
Pages
4667-4670
DOI
10.4028/www.scientific.net/AMM.121-126.4667
Citation
T. Haga, K. Komeda, K. Mtsuoka, S. Kumai, H. Watari, "Roll Casting of Recycled AA5182", Applied Mechanics and Materials, Vols. 121-126, pp. 4667-4670, 2012
Online since
October 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Ryoji Nakamura, Teppei Nakamura, Ryoji Nakamura, Hideto Harada, Shinji Kumai, Hisaki Watari
Abstract:Roll casting of Al-SiCp composite alloy strip was tried using a vertical type high speed twin roll caster equipped with mild steel rolls. The...
481
Authors: Toshio Haga, Hideki Inui, Ryoji Nakamura, Shinji Kumai, Hisaki Watari
Abstract:A 6061 aluminium alloy and an alloy with increased Fe content, representing recycled 6061 aluminium alloy were cast into strips at speed of...
1911
Authors: Toshio Haga, Kazuya Akitsu, Shinji Kumai, Hisaki Watari
Chapter 3: Energy Application, Material Engineering and Environment
Abstract:Single roll caster to cast strip with sound free solidified surface was invented. A scraper was attached to the single roll caster to improve...
368
Authors: Toshio Haga, Kazuya Akitsu, Shinji Kumai, Hisaki Watari
Chapter 2: Forming in Melt or Near Melt Condition
Abstract:A single roll caster equipped with a scraper was devised to cast the strip with sound free solidified surface. A property of this single...
307
Authors: Toshio Haga, Kosuke Komeda, Kenta Mtsuoka, Shinji Kumai, Hisaki Watari
Chapter 2: Materials Science and Engineering
Abstract:High speed roll casting of AA5182 aluminum alloy was tried using a vertical type high speed twin roll caster equipped with mild-steel rolls....
834