Paper Title:
Experimental Study and Simulation of Cutting Forces during the Deep Sawing of Granite
  Abstract

An experimental setup was established to measure and study the vertical and horizontal force components acted on the saw-blade during the whole deep sawing process of a granite workpiece with finite length. The accumulated thickness of the grits engaging with the workpiece in the sawing zone was obtained by numeric method to simulate the vertical and horizontal cutting forces respectively. The results showed that the simulated data tallied well with the measured data.

  Info
Periodical
Edited by
Kai Cheng, Yongxian Liu, Xipeng Xu and Hualong Xie
Pages
1341-1345
DOI
10.4028/www.scientific.net/AMM.16-19.1341
Citation
Y. Li, X. Xu, "Experimental Study and Simulation of Cutting Forces during the Deep Sawing of Granite", Applied Mechanics and Materials, Vols. 16-19, pp. 1341-1345, 2009
Online since
October 2009
Authors
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Ying Ning Hu, Cheng Yong Wang, H.N. Ding, Z.W. Wang
Abstract:The wear mechanism of several kinds of diamond circular saw blades was studied in the different sawing parameters during dry cutting of...
315
Authors: Xin Wei, Rui Wei Huang, Shao Hui Lai, Z.H. Xie
Abstract:ID (inner-diameter) slicing is widely used in cutting ingots currently. In this paper, the deflection (axial vibration) and vibration...
641
Authors: Shan Shan Hu, Ying Ning Hu, Cheng Yong Wang, Chang Xiong Chen
Abstract:Finite element mode analysis and structure optimization of several multitude holes structure diamond saw blades are conducted to study...
78
Authors: Jin Hui Liu, Guang Bin Bu, C. Zhao, Dun Wen Zuo, M. Wang
Abstract:The cutting force in manufacture process was observed with Kistler dynamometer. A special clamp was designed to simulate the real condition...
40
Authors: Zhi Gang Liu, Hou Jun Qi, Yu Jun Cai
Chapter 2: Simulation of Machining Processes
Abstract:The thin-walled blade of aero engine has low stiffness, during machining, it easily generates deflection due to the milling force, but...
124