Paper Title:
Influence of Heat Treatment for the Microstructure in GCr15 Bearing Steel
  Abstract

The influence of microstructure in GCr15 bearing steel by the different heat treatment conditions was studied, and the influence regular pattern of recrystallization percentage in GCr15 bearing steel by the different deformation amount, deformation temperature and dwell time after rolling was also analyzed. The research results show that when the deformation temperature and deformation amount under certain conditions, the recrystallization percentage of deformed austenite in GCr15 bearing steel increases as the dwell time after rolling increases, and the austenitic grain is also grow up; The uniformity of deformed austenite organization is influenced greatly by the different deformation amount, deformation temperature and dwell time after rolling, when the deformation temperature is 950 °C, the deformation amount is 45% and the dwell time after rolling is 100 S, the recrystallization percentage can up to 84.57%.

  Info
Periodical
Edited by
Ran Chen
Pages
2385-2389
DOI
10.4028/www.scientific.net/AMM.44-47.2385
Citation
F. M. Xie, Y. L. Wang, Y. Y. Xiang, Q. Zhang, "Influence of Heat Treatment for the Microstructure in GCr15 Bearing Steel", Applied Mechanics and Materials, Vols. 44-47, pp. 2385-2389, 2011
Online since
December 2010
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Guo Bin Li, Zheng Zhi Zhao, Di Tang
Abstract:The microstructure evolution of 780 MPa hot dip galvanized dual-phase (DP) steel at heating stages of the annealing process was analyzed...
1331
Authors: J.M. Rodriguez-Ibabe, P. Uranga, B. López
Keynotes
Abstract:The microstructural heterogeneities in steels may have different origins. The tendency in industry to decrease the total amount of reduction...
157
Authors: Leszek Adam Dobrzański, Wojciech Borek
Chapter 18: Steels
Abstract:The high-manganese austenitic steels are an answer for new demands of automotive industry concerning the safety of passengers by the use of...
2053
Authors: Wen Ping Liu, B. Zhang, Pei Qi Wang, Qin He Zhang
Chapter 13: Materials Forming
Abstract:To improve the product properties of H-beams, it is essential to understand the effects of hot rolling parameters on the microstructure...
2024
Authors: Marcin Knapiński, Bartosz Koczurkiewicz, Henryk Dyja, Anna Kawałek, Marcin Kwapisz
VII. Metallic Alloys
Abstract:The requirement for curde oil and natural gas is still increasing. It was observed a growing of interested in the exploration and...
518