Paper Title:
Research on Machining Methods of Turning Trapezoidal Thread for Slender Axle on Lathe
  Abstract

There were a lot of common points in turning the slender trapezoidal thread and the triangular thread on the common lathe, but there were also respective special features, because the trapezoidal thread used in machinery's transmission spot, the accuracy requirement was high, and during the machining, it was more complicated to turn the slender trapezoidal thread on the common lathe than the triangular thread. As long as control its processing rule, and adopts the correct processing method, we definitely may machine the high accuracy thread, this article elaborates ways and means of machining trapezoidal thread on slender axis, the machining of the trapezoidal thread for the slender axle can provide the experience and reference basis for such parts in the future. Introduction

  Info
Periodical
Chapter
Green Manufacturing Technology
Edited by
Aimin Yang, Jingguo Qu and Xilong Qu
Pages
388-391
DOI
10.4028/www.scientific.net/AMM.84-85.388
Citation
J. C. Feng, W. B. Chen, X. Liu, S. H. Huang, Q. Hong, "Research on Machining Methods of Turning Trapezoidal Thread for Slender Axle on Lathe", Applied Mechanics and Materials, Vols. 84-85, pp. 388-391, 2011
Online since
August 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Y. He, Zheng Qiang Yao
Abstract:End mills are very widely used in machining metal. In this paper, based on analysis of three different end milling indexable inserts with 3-D...
775
Authors: Hai Jun Qu, Gui Cheng Wang, Hong Jie Pei, Qin Feng Li, Yun Ming Zhu
Abstract:The cutting-direction burr is one of the important factors that influence the edge quality and performance of precision parts. The...
249
Authors: Zhi Gang Jiang, Hua Zhang, Xiao Luo
Abstract:Green Manufacturing is a sustainable development model in modern manufacturing. From the perspective of green manufacturing, the...
158
Authors: Xing Wei Sun, Guang Lv, Ke Wang
Modeling, Analysis and Simulation of Manufacturing Processes
Abstract:The key components of the single screw compressor are rotor screw and two star-wheels which are symmetrical arrangement. The rotor screw and...
543
Authors: Yu Mei Song, Jie Yu, Ning Ding, Xiang Hui Yu
Chapter 4: Mechatronics, Automation and Control
Abstract:Through CAXA finishing methods, based on the geometric factors of the formation of surface roughness, this article proposes optimization...
1129