Paper Title:
Experimental Investigation a Hydrofoil Lift Characteristic under the Action of Lorentz Force
  Abstract

Experiments study the Hydrofoil Lift Characteristic under the Action of Lorentz Force. With the streamwise wall-parallel Lorentz force applied on the whole suction side of the hydrofoil, The results show that the flow separation can be suppressed completely and the lift of hydrofoil is increased. The higher the Lorentz force, the larger the lift. It is also demonstrated that the Lorentz force actuator equipped on the front of the hydrofoil is more effective on the lift increase than that equipped on the tail.

  Info
Periodical
Edited by
Ford Lumban Gaol, Mehdi Roopaei, Svetlana Perry and Jessica Xu
Pages
78-81
DOI
10.4028/www.scientific.net/AMM.87.78
Citation
Y. H. Chen, B. C. Fan, Z. H. Chen, "Experimental Investigation a Hydrofoil Lift Characteristic under the Action of Lorentz Force", Applied Mechanics and Materials, Vol. 87, pp. 78-81, 2011
Online since
August 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Hong Bin Ren, A. Kiet Tieu, Cheng Lu, Giovanni D'Alessio
Abstract:In this paper, a 3D slab method model has been developed. Two differential equations governing the longitudinal and transverse force...
1279
Authors: Si Ji Qin, Li Yang, Jia Geng Peng
Abstract:The fine blanking process with a stepped-edge punch was researched by finite element method (FEM) and experiment investigation. Finite...
495
Authors: Yue Hai Lou, Jin Qiao Zou, Jin Yong Huang, Yin Jin
Chapter 3: Materials Forming, Machining and Joining
Abstract:It’s very difficult to machine titanium alloy because of its features of small deformation coefficient, low thermal conductivity, small...
1418
Authors: Tao Zhang, Zhan Qiang Liu, Chong Hai Xu, Ning He, Liang Li
Chapter 6: Micro-Cutting Technologies
Abstract:Micro cutting is a promising technology to manufacture the micro parts. The shear mechanism of micro cutting is different from the...
371
Authors: Hui Cheng, Yuan Li, Kai Fu Zhang, Bin Luo
Chapter 2: Mechanical Engineering, Manufacturing Technology and Application
Abstract:CFRP/AL stacks are widely used in modern aircraft manufacturing industry. Thrust force is the most important element which will cause...
263