Editor(s) in Chief

Prof. Xipeng Xu  
Huaqiao University, Research Institute of Manufacturing Engineering at Huaqiao University; No.668, Jimei Road, Xiamen, China, 361021;

Editorial Board

Prof. Ezio Cadoni  
University of Applied Sciences of Southern Switzerland, Department for Construction, Environment and Design, DynaMat Laboratory, SUPSI-DACD; Campus Trevano, Canobbio, 6952, Switzerland;
Dr. Yuan Sheng Cheng  
Harbin Institute of Technology, School of Materials Science and Technology; P.O. Box 435, Harbin, China, 150001;
Dr. D.A. Chinakhov  
National Research Tomsk Polytechnic University, Yurga Institute of Technology (Branch); Leningradskaya 26, Yurga, Russian Federation, 652055;
Prof. Oana Dodun  
Gheorghe Asachi Technical University of Iaşi, Department of Machine Manufacturing Technology; D. Mangeron Blvd, 39A, Iaşi, 700050, Romania;
Prof. Grigore Gogu  
Institut Français de Mécanique Avancée, Campus de Clermont-Ferrand/les Cézeaux, CS 20265; Clermont-Ferrand, 63175, France;
Prof. Moussa Karama  
Université de Toulouse, INPT - Ecole Nationale d’Ingénieurs de Tarbes (ENIT), LGP (Laboratoire Génie de Production); 47 Avenue d’Azereix, BP1629, Tarbes Cedex, 65016, France;
Dr. Tibor Krenický  
Technical University of Košice, Faculty of Manufacturing Technologies with a Seat in Prešov; Bayerova 1, Presov, 080 01, Slovakia;
Dr. Rozli Zulkifli  
Universiti Kebangsaan Malaysia, Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment; Bangi, Malaysia, 43600;