Paper Title:
Fabrication and Properties of Si3N4-SiC-C Refractory Composites
  Abstract

Si3N4-SiC-C refractory composites were prepared under the condition of 1450°C × 3h with electrofoging anthracite, Si3N4, SiC as the raw material and the modification emulsified bitumen as the binder. The effects of the silicon and silica fine powder additives on the compressive strength of Si3N4- SiC-C refractory composites were studied. The results indicated that adding an appropriate ratio range of silicon or silica fine powder in the composites both can improve the compressive strength of the material.

  Info
Periodical
Advanced Materials Research (Volumes 105-106)
Edited by
Wei Pan and Jianghong Gong
Pages
119-122
DOI
10.4028/www.scientific.net/AMR.105-106.119
Citation
Y. G. Xu, B. Jiang, Z. H. Huang, M. H. Fang, Y. G. Liu, "Fabrication and Properties of Si3N4-SiC-C Refractory Composites", Advanced Materials Research, Vols. 105-106, pp. 119-122, 2010
Online since
April 2010
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Dong Mei Zhu, Hong Na Du, Fa Luo, Wan Cheng Zhou
Abstract:Porous C/C composite with certain porosity prepared by Chemical vapor infiltration (CVI) was chosen as the preforms to develop the C/C-SiC...
1501
Authors: Sedigheh Salehi, Omer Vander Biest, Jef Vleugels
Abstract:1.75 mol % Y2O3-stabilized ZrO2-based composites with 35-95 vol % TiN were fully densified by hot pressing for 1 hour at 1550°C under a load...
135
Authors: Tao Jiang, Hai Yun Jin, Zhi Hao Jin, Jian Feng Yang, Guan Jun Qiao
Abstract:The machinable B4C/BN ceramics composites were fabricated by hot-pressing sintering process at 1850oC for 1h under the pressure of 30MPa....
53
Authors: Xin Fan
Chapter 3: Micro/Nano Materials
Abstract:Blends of Poly(L-lactide) (PLLA) and nano-SiO2 powder were prepared via solution mixing. Effect of nano-SiO2 particles on the crystallinity...
367
Authors: Mi Dan Li, Yao Lu, Lu Lu Feng, Huan Niu, Ya Wen Kong
Chapter 2: Research on Materials,Mechanics and Technologies
Abstract:Composites made from phenolic resin are filled with conductive filler mixtures containing copper powders, natural graphite powders and carbon...
120