Paper Title:
Manufacturing Technology of Strengthened Poplar Veneers
  Abstract

Three mixed liquids, Styrene, Methylmethacrylate and Vinyl acetate were used to soak poplar veneer to obtain strengthen poplar veneers. The optimal molar ratio was fixed on 1:2:1.Soaking and polymerization technology were obtained as pressure 0.4Mpa, packing time 60 minutes, polymerization temperature 80°C, polymerization time 6 hours, cobalt naphthenate 2%, zinc chloride 6%, and azobisisobutyronitrile 3%. The impact of high temperature on the conversion was significant in the chosen level, other factors on the conversion rate was not significant.

  Info
Periodical
Advanced Materials Research (Volumes 129-131)
Edited by
Xie Yi and Li Mi
Pages
149-153
DOI
10.4028/www.scientific.net/AMR.129-131.149
Citation
X. D. Zhu, F. H. Wang, J. Cao, J. P. Sun, "Manufacturing Technology of Strengthened Poplar Veneers", Advanced Materials Research, Vols. 129-131, pp. 149-153, 2010
Online since
August 2010
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Kunio Okimoto
Abstract:Impregnating resin into the open pores of a sintered iron compact is well known to improve the machinability of the compact. However, the...
1836
Authors: Xing Zhen, Jiu Yin Pang, Shi Cheng Zhang, Ya Zhe Jiang
Abstract:This study focuses on the effect of impregnation process on the main mechanical properties in the production of veneer composite plank. The...
2411
Authors: Guo Feng Wu, Qian Lang, Shu Ping Song, Jun Wen Pu
Chapter 2: Frontiers of Building Materials
Abstract:The aim of this research was to define a rapid and simple test that would indicate the probable performance of a pretreated wood species in a...
860
Authors: Zhu Li, Lin Xia Gao, Ke Wu Pi, Duan Ji Wan, Si Xiang
Chapter 8: Biological Chemical and Technology
Abstract:The aims of this work were to utilize tea seed shell, biomass waste, for the preparation of activated carbon by zinc chloride activation. The...
1099
Authors: Jian Han, Kai Neng Liu, Xi Tao Gao
Chapter 1: New Materials and Advanced Materials
Abstract:Through impregnating with UF resin, the modification technology of Poplar was experimented and studied. The study results proved that the...
54