Paper Title:
Study on Axial Turning of Engineering Ceramics
  Abstract

Axial turning is a method to cut the cylindrical work piece along its axis, using the kinetic energy of high-speed rotation annularity tool, the abrasives in tool tip (or toes) as the main cutting edge to remove materials and the abrasives in the inner surface of tool as a minor cutting edge to sharpen the processed surface. The cutting thickness and feed rate could be more than 3~5mm and 30mm/min respectively in a cutting, and realized high-efficient, low-cost processing of engineering ceramics. Processing mechanism analyses showed that both median/radial cracks and lateral cracks occurred in the part to be removed, and the intensity of the processed part had little destroyed, only needing adjust the axial force to control the length of transverse cracks.

  Info
Periodical
Edited by
Qiusheng Yan, Jiabin Lu, Jun Wang and Hang Gao
Pages
309-313
DOI
10.4028/www.scientific.net/AMR.135.309
Citation
X. L. Tian, F. Guo, J. F. Yang, B. G. Zhang, Y. T. Mao, "Study on Axial Turning of Engineering Ceramics", Advanced Materials Research, Vol. 135, pp. 309-313, 2010
Online since
October 2010
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Shinichi Higuchi, Zenji Makihara, Yoshio Nonaka, Norikazu Ooka
1316
Authors: J.R. Calcaterra
Abstract:Beta solution heat treatment is used to increase the fatigue crack growth resistance of Ti-6AL-4V. Unfortunately, the beta solution heat...
401
Authors: Jun Su, Shi Lang Xu, Dong Tao Xia
Chapter 2: Frontiers of Building Materials
Abstract:In this article, through the seismic experimental analysis for six frame joints of ultra-high toughness cementitious composites, the...
794
Authors: Xue Dao Shu, Bao Shou Sun, Min Xiao
Modeling, Analysis and Simulation of Manufacturing Processes
Abstract:Because of unbalanced axial force of cross wedge rolling asymmetric shaft-parts causing the rolling play and not stably, it is key factors to...
589
Authors: Ai Jun Jiang, Kai Wu
Chapter 2: Materials Science in Computer-Aided Manufacturing and Design
Abstract:The stability model was established and the two-dimensional and three-dimensional lobes were plotted for the milling of lateral walls in...
190