Paper Title:
Preparation of Magnetic Abrasive by Sintering Method
  Abstract

In this paper, ferrosilicon powder was used as the ferromagnetic phase, corundum powder as the abrasive phase, high temperature inorganic binder as the adhesive, and after the ferrosilicon powder was modified, a series of magnetic abrasive was obtained by sintering method. Scanning electron microscope (SEM) and Energy dispersive spectrometer (EDS) were respectively used to characterize the morphology and elemental composition of magnetic abrasive. and through experiments carried out on the magnetic abrasive grinding performance testing and durability analysis. The experimental results showed that the magnetic abrasive prepared had good polishing ability and longer using time, and the surface roughness of the grinding sample can reach 0.12μm and the using time is up to 25 min.

  Info
Periodical
Edited by
Qiusheng Yan, Jiabin Lu, Jun Wang and Hang Gao
Pages
382-387
DOI
10.4028/www.scientific.net/AMR.135.382
Citation
Z. D. Zhao, Y. H. Huang, Y. G. Zhao, "Preparation of Magnetic Abrasive by Sintering Method", Advanced Materials Research, Vol. 135, pp. 382-387, 2010
Online since
October 2010
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Hiroki Nakamura, Ji Wang Yan, Katsuo Syoji, Y. Wakamatsu
257
Authors: Yan Hua Zou, Takeo Shinmura
Abstract:This paper describes a new efficient internal finishing process for a thick tubing (10~30mm in thickness), by the application of a magnetic...
106
Authors: Zeng Dian Zhao, Yu Hong Huang, Yu Gang Zhao, Xian Jin Yu
Abstract:The silicon-coated iron powder was evenly mixed with corundum powder and high temperature binder. After tabletting and sintering, followed by...
553
Authors: Shi Ming Ji, Ya Min Xu, Guo Da Chen, Ming Sheng Jin
Abstract:Nowadays, researches concerned magnetic abrasive finishing (MAF) are becoming increasingly popular. Polishing head is one of the most...
593
Authors: Mahadev Gouda Patil, Kamlesh Chandra, Prabhu Shankar Misra
Chapter 5: Powder Metallurgy and Plastic Deformation
Abstract:Abstract: The magnetic abrasive finishing (MAF) process which was introduced during the late 1940s has emerged as an important...
1577