Paper Title:
Roll Casting of Al-SiCp Composite Strip
  Abstract

Roll casting of Al-SiCp composite alloy strip was tried using a vertical type high speed twin roll caster equipped with mild steel rolls. The Al-20vol% SiCp and Al-30vol%SiCp alloy could be roll-cast to the strip. The casting speed was 30m/min. The thickness of as-cast strip was thinner than 2.5mm. The SiCp powder was dispersed uniformly at the thickness direction. The as-cast strip could be thin down to 1mm by the hot rolling and the cold rolling without broken.

  Info
Periodical
Advanced Materials Research (Volumes 139-141)
Edited by
Liangchi Zhang, Chunliang Zhang and Tielin Shi
Pages
481-484
DOI
10.4028/www.scientific.net/AMR.139-141.481
Citation
R. Nakamura, T. Nakamura, R. Nakamura, H. Harada, S. Kumai, H. Watari, "Roll Casting of Al-SiCp Composite Strip", Advanced Materials Research, Vols. 139-141, pp. 481-484, 2010
Online since
October 2010
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Toshio Haga, Hiroshi Fuse
Chapter 18: Semi-Solid Processes
Abstract:Low solid fraction simple rheocasting using Al-25%Si is proposed to cast a product with thin fins. The characteristics of this casting are...
1551
Authors: Van Thuong Nguyen, Zuhailawati Hussain, Abu Seman Anasyida, Tr.D. Huy, Indra Putra Almanar
Chapter 1: Metallurgy
Abstract:The aim of this work was to develop understanding of microstructural evolution of the alloy casted in semi-solid condition using a cooling...
9
Authors: Yu Jun Zhang, Dong Ying Ju, Weng Yu Zhang, Yao Yao, Hong Yang Zhao, Xiao Dong Hu, Wei Teng
Chapter 8: Technical Provision of Researches and Technological Processes
Abstract:In this paper, the stiffness compensation is used in the roll-gap controller to improve the reliability of the control system. Simulation...
207