Paper Title:
Characterization of Porous Anodic Aluminium Oxide Film on Aluminium Templates Formed in Anodizing Process
  Abstract

A porous anodic aluminium oxide (AAO) films were successfully fabricated on aluminium templates by using anodizing technique. The anodizing process was done in the mixed acid solution of phosphoric acid and acetic acid. The growth, morphology and chemical composition of AAO film were investigated. During the anodizing process, the growth of the oxide pores was strictly influenced by the anodizing parameters. The anodizing was done by varying the voltage at 70 V to 130 V and temperature from 5 °C to 25 °C. The electrolyte concentration was remaining constant. In this study, all the samples were characterized using scanning electron microscope (SEM) and X-ray diffraction (XRD) techniques. From this study, the optimum parameters to obtain porous AAO film with the mixture of phosphoric acid and acetic acid solution can be known.

  Info
Periodical
Edited by
Zainal Arifin Ahmad, Muhd Ambar Yarmo, Fauziah Haji Abdul Aziz, Dr. Meor Yusoff Meor Sulaiman, Badrol Ahmad, Khairul Nizar Ismail, Nik Akmar Rejab
Pages
55-60
DOI
10.4028/www.scientific.net/AMR.173.55
Citation
A. W. Juyana, M. N. Derman, "Characterization of Porous Anodic Aluminium Oxide Film on Aluminium Templates Formed in Anodizing Process", Advanced Materials Research, Vol. 173, pp. 55-60, 2011
Online since
December 2010
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Khaled Habib, K. Al-Muhanna, F. Al-Sabti, A. Al-Arbeed
Abstract:In the present investigation, holographic interferometry was utilized for the first time to measure in situ the thickness of the oxide film,...
283
Authors: Tomasz Pawlik, Małgorzata Sopicka-Lizer, Marta Mikuśkiewicz, Malgosia Gwizdz
Abstract:This paper describes the manufacturing and corrosion resistance of sialon based ceramics for application in the modern aluminium industry....
142
Authors: Waldemar Serbiński
Abstract:The main reason of the surface modification of the components such as pistons and cylinder blocks made of cast aluminium alloys is to obtain...
336
Authors: Yu Cheng Wu, Jie Wu Cui, Yan Wang, Guang Qing Xu, Xin Yi Zhang
Abstract:Anodic aluminium oxide(AAO) templates were fabricated by a two-step anodization method utilizing high purity aluminium sheets. On the basis...
707
Authors: Khaled Habib, K. Al-Muhanna, F. Al-Sabti, A. Al-Arbeed
Abstract:The technique of electrochemical impedance spectroscopy (EIS) is widely used in laboratories and industries for materials evaluation. The aim...
35