Paper Title:
Precipitates and Lüders Elongation in Ferritic Stainless Steels Stabilized with Ti and V
  Abstract

The influence of finish rolling temperature on the precipitates and Lüders elongation in ultra purified ferritic stainless steels stabilized with Ti and V has been investigated, in which the hot rolled bands were produced by conventional rolling process and the finish rolling at relatively low temperatures. It was shown that finish rolling at relatively low temperatures promoted the formation of a large number of fine MC precipitates, which were denser in dispersion and finer in size than those formed in conventional rolling process by strain-induced precipitation, and consequently scavenging of interstitial atoms in solid solution, indicating that the finish rolling at relatively low temperatures can be the effective way to significantly reduced Lüders elongation for the final sheets. These results have been confirmed by the internal friction measurements.

  Info
Periodical
Advanced Materials Research (Volumes 194-196)
Edited by
Jianmin Zeng, Taosen Li, Shaojian Ma, Zhengyi Jiang and Daoguo Yang
Pages
16-19
DOI
10.4028/www.scientific.net/AMR.194-196.16
Citation
F. Gao, W. N. Zhang, Z. B. Zhang, Z. Y. Liu, G. D. Wang, "Precipitates and Lüders Elongation in Ferritic Stainless Steels Stabilized with Ti and V", Advanced Materials Research, Vols. 194-196, pp. 16-19, 2011
Online since
February 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Yoshimasa Takayama, Y. Otsuka, Toshiya Shibayanagi, Hajime Kato, Kunio Funami
Abstract:Grain refinement and high temperature deformation in two kinds of magnesium alloys subjected to friction stir processing (FSP) have been...
55
Authors: Yoshimasa Takayama, H. Ochiai, Norio Furushiro, Hajime Kato, Hideo Watanabe
Abstract:Severely rolled sheets of Al-4.5%Mg-0.7%Mn based alloys have been prepared to achieve grain refinement leading to low temperature...
601
Authors: Rintaro Ueji, Kenji Harada, Noriyuki Tsuchida, Kazutoshi Kunishige
Abstract:Tensile properties of twinning induced plasticity (TWIP) steels (31%Mn-3%Al-3%Si-Fe) with various mean grain sizes ranging from ultrafine...
107
Authors: Hong Mei Chen, Hua Shun Yu, Suk Bong Kang, Guang Hui Min
Abstract:The microstructure of a twin roll cast (designated as TRC in short) and warm rolled Mg-4.5Al-1.0Zn (designated as AZ41 in short) alloy was...
2139
Authors: Ho Jun Bang, Ha Guk Jeong, Jong Beom Lee
B. Eco-Materials Processing and Design, Multifunctional Materials
Abstract:Mg alloy sheets exhibit the yield strength of 280 MPa and elongation of 18 % by rolling at 423 K. Elongation of Mg alloy sheets was improved...
190