Paper Title:
Friction and Wear Characteristics of Spherical Plain Bearings with PTFE Woven Liners
  Abstract

The friction and wear behaviors of three kinds of spherical plain bearings with PTFE woven liners were investigated by a high oscillating frequency and heavy load tribo-tester. Dry sliding tests were carried out at an oscillating frequency of 1.2Hz and four different loads. With the help of SEM and EDS, the differences of worn surfaces of the three kinds were investigated. The results indicate that the wear depth and friction temperature for the three kinds of bearings show increasing trend with the increasing of load, while the friction coefficient is the opposite. The comprehensive performance of bearing II is the best in the whole course of experiment, while the bearing III is the worst. The adhesive and abrasive wear mechanisms are appeared on the surface of liners. The quality of boning influences the tribological property of the spherical plain bearing.

  Info
Periodical
Advanced Materials Research (Volumes 199-200)
Edited by
Jianmin Zeng, Zhengyi Jiang, Taosen Li, Daoguo Yang and Yun-Hae Kim
Pages
763-766
DOI
10.4028/www.scientific.net/AMR.199-200.763
Citation
M. Qiu, Z. L. Gao, G. F. Wang, L. Chen, "Friction and Wear Characteristics of Spherical Plain Bearings with PTFE Woven Liners", Advanced Materials Research, Vols. 199-200, pp. 763-766, 2011
Online since
February 2011
Export
Price
$35.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Dong Man Yu, Chang Pei Shang, Di Wang, Zhi Hua Gao
Abstract:Due to high rotation accuracy, high dynamic stiffness, high vibration damping and long life, high-speed spindles supported by hydrodynamic...
1511
Authors: You Qiang Wang, Chao Li
Abstract:Water lubricated rubber bearings are one of the most appropriate bearings for underwater use. The most popular design used widely today is...
12
Authors: Xin Tao Xia, Lei Lei Gao, Xiao Chao Sun
Chapter 1: Advanced Structure, Construction Materials and Dynamic Engineering
Abstract:The standard uncertainty in the measurement theory is applied to evaluate the change of the rolling bearing vibration acceleration generated...
133
Authors: Koshiro Mizobe, Edson Costa Santos, Takashi Honda, Hitonobu Koike, Katsuyuki Kida, Yuji Kashima
Chapter 3: Materials and Information Technology
Abstract:In order to establish an optimal combination of materials used for polymer thrust bearings, two types of components (polyetheretherketone...
557
Authors: Xia Zhang, Xin Rong Wang, Xiao Hai Li, Xuhong Chu
Chapter 3: Mechanical Transmission Theory and Applications
Abstract:Water is a kind of low viscosity liquid and the bearing capacity of water lubrication bearings is very low. The influence factors of bearing...
949