Paper Title:
Study on the Effect of Waste Gypsum on Hardening Paste Structure and Performances of Lime-Fly Ash
  Abstract

Based on the experiments, the effect of waste gypsum on the formation of paste structure, the early strength and the stability of lime-fly ash is discussed in the article. As is shown by the results, the early strength of paste was improved by adding waste gypsum into lime-fly ash. The stability of lime-fly ash paste modified by waste gypsum could meet technical requirements when waste gypsum admixture was less than 40%. With the increase of hydration age, the number of ettringite (AFt) and C-S-H gel in paste would increase.

  Info
Periodical
Edited by
Zhang Yushu
Pages
31-34
DOI
10.4028/www.scientific.net/AMR.213.31
Citation
J. Y. Sun, Y. D. Xu, "Study on the Effect of Waste Gypsum on Hardening Paste Structure and Performances of Lime-Fly Ash", Advanced Materials Research, Vol. 213, pp. 31-34, 2011
Online since
February 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Yong Mei Sun, Juan Hong Liu
Abstract:In this article, the effects of different content and compound ratio of low-grade fly ash and limestone powder on the strength, water...
992
Authors: Chun Ping Tang, Li Gun Wu
Abstract:Aiming at the characteristics of phosphate repair material, by mixing fly ash in it, its properties can be improved effectively. The...
796
Authors: Yuan Chao Wu, Xiao Cun Liu, Bao Liang Li, Tong Liu, Wei Shan Wang, Yan Jun Li
Chapter 8: Constructional Materials
Abstract:The paper studied the adaptability between alite-sulphoaluminate cement clinkers with different amount of C3S and the fly ash...
975
Authors: Jing Liang Xia, Zhuan Qin Wu, Ren Jie Shang, Bei Xing Li, Fang Xin Jiang, Zhi Qiang Yin
Chapter 1: Traditional Building Materials
Abstract:Based on durability of fly ash concrete, the freezing and thawing, impermeability and cracking resistance of fly ash concrete were...
657
Authors: Ping Tan
Chapter 1: Materials Science and Technologies
Abstract:The binding material and concrete are prepared by desulphurization gypsum, cement, stone, sand and admixture. The performances of binding...
17