Paper Title:
Study on the Influence of Initial Temperature of Tire on Curing Temperature Field and Cure State
  Abstract

The influence of initial curing temperature on curing temperature field and cure state in the process of tire curing was studied by FE (Finite Element) analysis method. Preheating was carried out under atmospheric pressure. Preheating temperature should be lower than curing temperature to prevent the air bubbles. The temperature was set at 20°C, 30°C, 40°C, 50°C, 60°C, 70°C. The results show that the preheating treatment cause the temperature rise uniformly in each parts of the tire, which not only shortened the curing time in the curing press, but also improved the uniformity of curing state of the tire.

  Info
Periodical
Edited by
Chuansheng Wang, Lianxiang Ma and Weiming Yang
Pages
528-532
DOI
10.4028/www.scientific.net/AMR.221.528
Citation
Q. L. Li, L. C. Fan, T. Li, H. L. Chen, "Study on the Influence of Initial Temperature of Tire on Curing Temperature Field and Cure State", Advanced Materials Research, Vol. 221, pp. 528-532, 2011
Online since
March 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Jian Cheng Fang, Wen Ji Xu, Zhi Yu Zhao, L. Wang
Abstract:There are many technical parameters influencing on the coating quality in plasma spray forming which has become an important technology in...
2823
Authors: Li De Fang, Ji Ke Zhang, Xiao Ting Li, Xiu Ming Xiang
Chapter 30: Automation, Mechatronics and Robotics
Abstract:The dynamic characteristics of temperature sensor are very important in industrial temperature measure. In this paper, the dynamic...
7637
Authors: Zi Yu Zhao, Guang Tao Zhou, Bi Bo Xia, Su Zhi Zhang
Abstract:Experimental system of CCD real-time acquisition is developed according to high temperature property of plasma jet. Mathematical model of...
1259
Authors: Xiao Qing Nie, Hong Xiu Du, Rui Zhen Yan
Chapter 4: Building Materials and Processing Technology
Abstract:After 51 C40 HPC specimens with a size of 100mm×100mm×400mm were heated to 400°C, 600°C, 700°C, 800°C for 2 hours, and 300°C and 500°C for...
345