Paper Title:
Casting of Al-25%Si Strip Using a Vertical Type Twin Roll Caster
  Abstract

Strip casting of Al-25%Si was tried using the vertical type high speed twin roll caster. Some devices were adopted to enable the strip casting of Al-25%Si. Control of the roll gap, semisolid casting and non-use of the lubricant were useful devices to cast Al-25%Si strip. Roll-casting-ability of the Al-25%Si was discussed. The strip could be cast at 20m/min and 40m/min. As-cast strip was hot rolled down to 1mm by one pass. Bulging was tried at 550°C and it was able.

  Info
Periodical
Advanced Materials Research (Volumes 239-242)
Edited by
Zhong Cao, Xueqiang Cao, Lixian Sun, Yinghe He
Pages
1944-1947
DOI
10.4028/www.scientific.net/AMR.239-242.1944
Citation
T. Haga, H. Harada, S. Kumai, H. Watari, "Casting of Al-25%Si Strip Using a Vertical Type Twin Roll Caster", Advanced Materials Research, Vols. 239-242, pp. 1944-1947, 2011
Online since
May 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Ryoji Nakamura, Masayuki Saito, Shinji Kumai, Hisaki Watari
Abstract:Roll casting of Al-25mass%Si hyper eutectic aluminum alloy strip was tried by an unequal diameter twin roll caster. The casting speed was...
1057
Authors: Ryoji Nakamura, Teppei Nakamura, Ryoji Nakamura, Hideto Harada, Shinji Kumai, Hisaki Watari
Abstract:Roll casting of Al-SiCp composite alloy strip was tried using a vertical type high speed twin roll caster equipped with mild steel rolls. The...
481
Authors: Ryoji Nakamura, Toshio Haga, Shinji Kumai, Hisaki Watari
Abstract:In this study, the roll casting of Al-40%Sn-1%Cu alloy was tried by an unequal diameter twin roll caster. The unequal diameter twin roll...
1905
Authors: Toshio Haga, Hideto Harada, Shinji Kumai, Hisaki Watari
Chapter 1: Advanced Materials Science
Abstract:Strip casting of Al-25%Si strip was tried using an unequal diameter twin roll caster. The diameter of the lower roll (large roll) was 1000mm...
669
Authors: Toshio Haga, Kosuke Komeda, Kenta Mtsuoka, Shinji Kumai, Hisaki Watari
Chapter 2: Materials Science and Engineering
Abstract:High speed roll casting of AA5182 aluminum alloy was tried using a vertical type high speed twin roll caster equipped with mild-steel rolls....
834