Paper Title:
Extrudability and Bonding Strength of Copper Clad Aluminum Alloy Composites Produced by Indirect Extrusion Process
  Abstract

This paper described extrudability and bonding strength of copper (TPC) clad aluminum alloy (pure Al, Al3003, Al5005, and Al7072) composites produced by indirect extrusion at 350°C with extrusion ratio of 21.39. Conical typed die with semi angle of 30°. Carbon oil was used to reduce the friction between billet/sleeve and billet/die. Maximum extrusion pressure was estimated to 491MPa for the Cu/Al, 714MPa for the Cu/Al3003, 820MPa for the Cu/Al5005, and 743MPa for the Cu/Al7072 alloy composites. No surface fracture was observed. From SEM observation, diffusion layer between the sheath material and the core material of extruded composites is observed and its thickness was measured to about 1.5㎛. The bonding strength was estimated to 65MPa for the Cu/Al, 89.3MPa for the Cu/Al3003, 70MPa for the Cu/Al5005, and 75MPa for the Cu/Al7072 alloy composites.

  Info
Periodical
Advanced Materials Research (Volumes 26-28)
Edited by
Young Won Chang, Nack J. Kim and Chong Soo Lee
Pages
417-420
DOI
10.4028/www.scientific.net/AMR.26-28.417
Citation
H. C. Kwon, T. K. Jung, J. W. Kang, H.J. Lee, K.H. Kim, S. C. Lim, H.S. Lee, "Extrudability and Bonding Strength of Copper Clad Aluminum Alloy Composites Produced by Indirect Extrusion Process", Advanced Materials Research, Vols. 26-28, pp. 417-420, 2007
Online since
October 2007
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Hong Xin Shi, Ran Feng Qiu, Yi Min Tu, Hua Yu, Dan Qing Yin
Welding & Joining
Abstract:The diffusion welding between aluminum alloy and steel was achieved in this study. The influence of welding temperature on the interfacial...
1003
Authors: Won Nyeon Kim, In Kyu Kim, Sun Ig Hong
Chapter 1: Metal Materials, Alloys and Heat Treatment of Metals
Abstract:The tensile mechanical performance and ductility of Cu/Al/Cu clad composite were studied. Brittle interfacial reaction compounds were...
7
Authors: Long Li, Xin Chen, De Jing Zhou, Chao Lan Tang
Chapter 9: Metals and Alloys in Industrial Applications
Abstract:The bond strength were comparatively measured by tensile test, tension shear test and compression shear test in order to evaluate bonding...
967
Authors: Xing Han, Jian Zhong Cui
Chapter 1: Casting and Solidification
Abstract:AA4045/AA3003 cladding billets with different clad ratios were fabricated by direct chill casting process. The macrostructures,...
9