Paper Title:
The Effect of Post Weld Heat Treatment on Mechanical Properties of Friction-Welded Alloy 718 and SNCRW Stainless Steel
  Abstract

The effect of post weld heat treatment on mechanical properties of friction welded Alloy 718 and SNCRW was investigated. Friction welding tests were carried out at a constant rotation speed and pressure. Optimum friction condition was found to be the friction pressure of 25kg/cm2, friction time of 40sec, upset pressure of 80 kg/cm2, and dwell time of 5sec. After friction welding tests, post weld heat treatments were performed in the temperature range of 500-900°C for 8hrs in order to investigate the microstructure and mechanical properties of weld joint. Specimens with the post weld heat treatment at 720°C for 8hrs show optimal mechanical properties. Residual stress of post weld heat treated specimens was measured to weld joint in the same temperature range. After friction welding tests on samples with a diameter of 80mm, tensile properties of post-weld-heat-treated and non-heat-treated samples were compared.

  Info
Periodical
Advanced Materials Research (Volumes 26-28)
Edited by
Young Won Chang, Nack J. Kim and Chong Soo Lee
Pages
511-514
DOI
10.4028/www.scientific.net/AMR.26-28.511
Citation
N. Y. Kim, J. H. Kim, Y. S. Kong, J. W. Yoon, J. T. Yeom, D. G. Lee, N. K. Park, "The Effect of Post Weld Heat Treatment on Mechanical Properties of Friction-Welded Alloy 718 and SNCRW Stainless Steel ", Advanced Materials Research, Vols. 26-28, pp. 511-514, 2007
Online since
October 2007
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: E.P. Masuku, Gonasagren Govender, L. Ivanchev, Heinrich Möller
Abstract:Rheocasting of alloys A206 and A201 was investigated in this study. Conical bars with different silver contents were produced using CSIR...
151
Authors: Yi Guo Song, Feng Chen, Li Li, Yu Feng Zheng
Abstract:The advanced manufacturing technology of TiNiNb wide hysteresis shape memory alloy fastener ring was performed by using the tungsten inert...
529
Authors: Hui Jie Liu, Li Zhou, Yong Xian Huang, Qi Wei Liu
Abstract:As a new solid-state welding process, friction stir welding (FSW) has been successfully used for joining low melting point materials such as...
1185
Authors: Yong Xue, Zhi Min Zhang, Li Hui Lang, Li Li
Abstract:In the present paper a research has been made on the effect of aging on the microstructure and mechanical properties of AZ80 and ZK60 wrought...
560
Authors: Xiao Ping Luo, Lan Ting Xia, Ming Gang Zhang
Abstract:The effect of Cd and Sb addition on the microstructural and mechanical properties of as-cast AZ31 alloys was investigated and compared. The...
197