Paper Title:
Influences of Melt Temperature on Casting Structure of Al-Cu-Mn Alloy Treated by Electric Pulse Modification
  Abstract

It was investigated that the effect of electric pulse modification (EPM) on the hot tearing of Al-5%Cu-0.8%Mn alloy. The results indicate that hot tearing tendency of all samples can be reduced treated by electric pulse with different parameters, moreover, hot tearing stress of alloy with EPM was enhanced 3 times or so than that of samples without treatment. Decreasing the quantity of eutectic in grain boundaries, decreasing the end-solidifying temperature of the alloys, and refining the grains are main causations for increasing hot tearing resistance of Al-5%Cu-0.8%Mn alloy by electric pulse modification.

  Info
Periodical
Advanced Materials Research (Volumes 299-300)
Edited by
Jianzhong Wang and Jingang Qi
Pages
408-411
DOI
10.4028/www.scientific.net/AMR.299-300.408
Citation
B. Wang, L. D. Tang, J. Z. Wang, J. G. Qi, "Influences of Melt Temperature on Casting Structure of Al-Cu-Mn Alloy Treated by Electric Pulse Modification", Advanced Materials Research, Vols. 299-300, pp. 408-411, 2011
Online since
July 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Li Jia He, Jian Zhong Wang, Jin Gang Qi, Da Qiang Cang
555
Authors: Zhong Wei Chen, Pei Chen, Li Fan
Abstract:The Dendrite Coherency Point (DCP) of A357 alloy was determined after different melt treatments by double thermocouples, and the coherency...
3886
Authors: Jin Tao Li, Guang Ming Xu, Jian Zhong Cui
Abstract:The roll-casting technology of 5000 series aluminum alloy is one of the difficulties at present. Roll-casting technology was employed in this...
4018
Authors: Zhi Hao Chen, Wei Zheng, Fang Qiu Zu, Xie Bing Zhu, Yu Feng Sun
Chapter 6: Composite Materials
Abstract:Currently, Pb-free is the primary trend of development for solder alloys, and the existing Pb-free solder alloys are still difficult to...
489
Authors: Quan Zhou, Yang Cao, Le Ping Chen
Chapter 17: Casting and Solidification
Abstract:The influences of different pulse voltage and mold temperature on solidified structure of 6061 alloy under low-voltage pulsed magnetic field...
2413