Paper Title:
Hot Deformation Microstructure and Mechanical Properties of Mg-Zn-Nd-Cd-Zr Alloy
  Abstract

Hot compression tests of the homogenized Mg-Zn-Nd-Cd-Zr magnesium alloy were performed on Gleeble-1500 at temperatures between 300 °Cand 420 °C and at strain rates ranging from 0.001 to 1 s-1 with maximum strain of 0.8. The microstructure of the experimental alloy in the hot-compression procedure at elevated temperatures was observed by OM (optical microscope) and TEM (transmission electron microscope). The results provide the experimental basis for selecting hot wrought conditions of the alloy. The peak flow stress becomes larger with the increasing strain rate at constant temperature, and gets smaller with the increasing deformation temperature at constant strain rate. The deformation activation energy increases greatly in the range of higher than 420°C, and no more change in the range of 340-380°C. The alloy can be extruded successfully at 360°C with of δb 310 Mpa, δ2 of 290Mpa, and δof 16%。

  Info
Periodical
Advanced Materials Research (Volumes 311-313)
Chapter
Metal Alloy Materials
Edited by
Zhongning Guo
Pages
690-696
DOI
10.4028/www.scientific.net/AMR.311-313.690
Citation
X. L. Liu, C. M. Liu, W. Y. Zhang, H. Z. Li, S. M. Zeng, "Hot Deformation Microstructure and Mechanical Properties of Mg-Zn-Nd-Cd-Zr Alloy", Advanced Materials Research, Vols. 311-313, pp. 690-696, 2011
Online since
August 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Chang Liang Li, Hua Ding, Yong Qing Zhao, Lian Zhou
Abstract:Superplastic forming provides a good way for Ti alloys which are usually difficult to be deformed. Ti75 alloy with a nominal composition of...
2969
Authors: Jeong Min Kim, Bong Koo Park, Joong Hwan Jun, Ki Tae Kim, Woon Jae Jung
Abstract:Small amounts of minor alloying elements such as RE and Sr were added to Mg- 8wt%Al-5wt%Zn (AZ91D+4%Zn), and their effects on the...
374
Authors: Zhi Guo Chen, Zi Qiao Zheng, Dong Feng Han
Abstract:The hot deformation behaviors and microstructure in Al-Cu-Li alloy containing small amount of Ag and Mg were investigated by transmission...
1925
Authors: Zhi Min Zhang, Qiang Wang, B.C. Li, X. Zhang
Abstract:Warm compression tests of AZ31 Mg alloy were carried out at five temperatures in 30°C intervals from 210°C to 330°C. The samples of...
1813
Authors: Cui Li, Wei Qi, Kutsuna Muneharu
Abstract:A zircon coating was applied on the surface of Ti-6Al-4V alloy by plasma spray and its effect on the high temperature tensile properties of...
547