Paper Title:
Drilling of Borosilicate Glass with Feedback Control Based on Cutting Force
  Abstract

This paper deals with drilling of borosilicate glass with feedback control based on cutting force, in order to provide a basis for defect-free machining of through-holes on borosilicate-glass plates. In this work a machining system which can be operated at a predetermined cutting force by changing the feed rate based on cutting force measured by a piezoelectric type of cutting dynamometer was developed. Subsequently, drilling tests of borosilicate glass was carried out with the developed system. Based on the results of the drilling tests, It has been confirmed that feedback control based on cutting force has the possibility of defect-free drilling of borosilicate-glass plate under specific conditions.

  Info
Periodical
Chapter
Chapter 2: Turning, Milling and Drilling
Edited by
Taghi Tawakoli
Pages
442-448
DOI
10.4028/www.scientific.net/AMR.325.442
Citation
H. Ohzeki, F. Arai, "Drilling of Borosilicate Glass with Feedback Control Based on Cutting Force", Advanced Materials Research, Vol. 325, pp. 442-448, 2011
Online since
August 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: S.W. Youn, Chung Gil Kang
Abstract:The purpose of this study is to suggest a maskless pattern fabrication technique using the combination of machining by Nanoindenter® XP and...
3479
Authors: X. Kang, Junichi Tamaki, Akihiko Kubo, Ji Wang Yan, Toshirou Iyama
Abstract:For the purpose of investigating the effect of cutting edge truncation on ground surface morphology, several kinds of hard and brittle...
139
Authors: Lukáš Řehořek, Zdeněk Chlup, Ivo Dlouhý, Aldo Roberto Boccaccini
Abstract:Fracture behaviour and mechanical properties are the key features when a material for given application is supposed to be selected. Advanced...
369
Authors: Xi Hai Shen, Chun Xiang Sun, Li Chun Wang
Abstract:Vacuum brazing of glass to Kovar alloy was carried out at 670~700°C using Cu-Ni-Sn-P brazing alloy. The holding time ranges from 5min to...
686
Authors: Yong Ki An, Byung Yun Joo, Dong Teak Chung, Hyung Kang
XI. Numerical Simulations
Abstract:The thickness and weight of a bulletproof glass material can be reduced using strengthened glass possessing current protective abilities. In...
468