Paper Title:
Application of the VSD Model to Determine Regional Control Targets of Acid Deposition
  Abstract

In order to control regional acid deposition pollution, it is necessary to determine scientific regional control targets for atmospheric acid deposition. This study proposed a method to conduct multi-site simulation using the VSD model and the simulation results were plotted by cumulative frequency distribution curves. Then the regional acid deposition control targets were determined based on the analysis of the restoration of the soil in the region under different deposition scenarios in the target years. The method was applied in the Guangzhou-Dongguan-Huizhou region. To analyze the control targets for acid deposition in this region, 25 sites were simulated by VSD model based on onsite soil sampling and investigation, and the results were plotted by cumulative frequency distribution curves. The results indicated that when S deposition was controlled alone and if the protection rate was 80%, the S control targets should be 7.68-12g.m-2.yr-1 in the short-term and 10.24-16g.m-2.yr-1 in the long-term; the short-term and long-term S deposition control targets should be 5.12-8g.m-2 .yr-1 和7.68-12g.m-2 .yr-1 if the protection rate was 95%. When the S and BC depositions were controlled simultaneously and if the protection rate was 80%, the S control targets should be 2.56-4 g.m-2 .yr-1 in the short-term and 5.12-8 g.m-2 .yr-1 in the long-term when BC deposition was 6.4-12.8 g.m-2 .yr -1 ; and the S control targets should be 2.56-4 g.m-2.yr-1 when BC deposition was 4.8-9.6 g.m-2.yr-1. If the protection rate was 95%, the S control targets should be 0.64-1 g.m-2.yr-1 in the short-term and 5.12-8 g.m-2.yr-1 in the long-term when BC deposition was 6.4-12.8 g.m-2.yr-1; and the S control targets should be 0.64-1g.m-2.yr-1 in the short-term and 2.56-4g.m-2.yr-1 in the long-term. When BC deposition was 2-4 g.m-2.yr-1, S deposition should be controlled to 0.64-1g.m-2.yr-1 for the protection rate of 80% and 95%, and some manual restoration measures are required at the same time

  Info
Periodical
Advanced Materials Research (Volumes 356-360)
Chapter
Chapter 14: Environmental Protection
Edited by
Hexing Li, Qunjie Xu and Daquan Zhang
Pages
2647-2657
DOI
10.4028/www.scientific.net/AMR.356-360.2647
Citation
H. C. Zhao, S. D. Xie, "Application of the VSD Model to Determine Regional Control Targets of Acid Deposition", Advanced Materials Research, Vols. 356-360, pp. 2647-2657, 2012
Online since
October 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Ya Bo Fu, Dong Li Li, Wen Cai Xu, Xia Qing Tian
Chapter 1: Advanced Engineering Materials
Abstract:Gas permselective packaging film is an emerging material which enables it with gas selective permeation functions so as to keep the...
567
Authors: Xiao Jiao Yu, A Man Zhang, Jian Zhang, Jie Zhao, Bing Hua Yao, Guang Jun Liu
Abstract:Cu2O thin films is preparated through electrodeposition with conductive glass of coating indium tin oxide as work electrode.The...
371
Authors: Fu Ping Qian, Xian Kun Yu
Chapter 6: Environmental Engineering
Abstract:The grid “freezing” method in computational fluid dynamics (CFD) was used to deal with the moving boundary in this study, which can make the...
1767
Authors: Hong Yan Lin, Chun Cai Wang, Cui Yan Yu, Tao Xu
Chapter 8: Energy Materials, Engineering Materials and Processing Technologies
Abstract:Two-step preparation technology was used to prepare anodic aluminum oxide (AAO) templates. Then deposit Ni nanowire arrays in nanopores of...
2064