Paper Title:
The Effects of Cement Content, Sand Percentage and Fly Ash Dosage on Lightweight Aggregate Concrete
  Abstract

The paper is one part of ongoing research on structural lightweight aggregate concrete. Lightweight aggregate concrete with compressive strength class of CL40 and slump of 160-200 mm were studied. The influences of the cement content, sand percentage and fly ash dosage on properties of fresh and hardened LWAC, such as fresh density, workability and compressive strength were investigated.

  Info
Periodical
Key Engineering Materials (Volumes 302-303)
Edited by
Nai-Qian Feng and Gai-Fei Peng
Pages
282-287
DOI
10.4028/www.scientific.net/KEM.302-303.282
Citation
L. Wei, F. Xing, L. Han, "The Effects of Cement Content, Sand Percentage and Fly Ash Dosage on Lightweight Aggregate Concrete", Key Engineering Materials, Vols. 302-303, pp. 282-287, 2006
Online since
January 2006
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Yi Jin Li, Shi Qiong Zhou, Jian Yin, Jun Li
Abstract:The subject of concrete recycling is regarded as very important in the general attempt for sustainable development in our times. Due to a...
314
Authors: Hai Long Ma, Chong Cui, Bi Xin Zhang
Abstract:This paper focuses on studying the physical and mechanical performance of propylene oxide sludge aggregates having no shell (POSA-0), single...
2438
Authors: Ying Jun Mei, Jin Hang Wu, Jian Hua Zheng
Chapter 4: Ecological Architecture and Building Energy Saving Technology
Abstract:The reutilization of waste concrete and fly ash produced by power plant is one way to develop green concrete. The addition of fly ash in...
654
Authors: Jian Hua Xue, Xiao Guang Li, Yun Xiao Liu, Qiang Du
Chapter 8: Recycling and Reusing of Building Material
Abstract:Recycled concrete aggregate (RCA) and crushed clay bricks (CCB) have been increasingly researched and used in past two decades. However,...
1637
Authors: Qing Wei Sun, Han Zhu
Chapter 2: Manufacturing and Design Science
Abstract:According to problems with the paste to aggregate ratio increases significantly and lack of recognition to cementitious materials effect of...
2110