Paper Title:
Formability of Mg-Zn-Zr Based Alloy Sheets at Elevated Temperatures
  Abstract

Mg-3%Zn-0.2%Zr based alloy sheets with various alloying elements additions were fabricated through thermo-mechanical process, and their microstructure and mechanical properties were investigated at room and elevated temperatures. CCV(conical cup value) and V-bend tests were also carried out to evaluate the formability of the fabricated alloy sheets. The experimental results showed that small amounts of Sn or Sr additions could improve the elongation at elevated temperatures, even though the room temperature tensile properties were slightly deteriorated by the Sr addition.

  Info
Periodical
Key Engineering Materials (Volumes 345-346)
Edited by
S.W. Nam, Y.W. Chang, S.B. Lee and N.J. Kim
Pages
21-24
DOI
10.4028/www.scientific.net/KEM.345-346.21
Citation
J. M. Kim, B. K. Park, J. H. Jun, K. T. Kim, W. J. Jung, "Formability of Mg-Zn-Zr Based Alloy Sheets at Elevated Temperatures", Key Engineering Materials, Vols. 345-346, pp. 21-24, 2007
Online since
August 2007
Export
Price
$35.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Jeong Min Kim, Bong Koo Park, Joong Hwan Jun, Ki Tae Kim, Woon Jae Jung
Abstract:Small amounts of minor alloying elements such as RE and Sr were added to Mg- 8wt%Al-5wt%Zn (AZ91D+4%Zn), and their effects on the...
374
Authors: Zhi Min Zhang, Qiang Wang, B.C. Li, X. Zhang
Abstract:Warm compression tests of AZ31 Mg alloy were carried out at five temperatures in 30°C intervals from 210°C to 330°C. The samples of...
1813
Authors: E.P. Masuku, Gonasagren Govender, L. Ivanchev, Heinrich Möller
Abstract:Rheocasting of alloys A206 and A201 was investigated in this study. Conical bars with different silver contents were produced using CSIR...
151
Authors: Xiao Ping Luo, Lan Ting Xia, Ming Gang Zhang
Abstract:The effect of Cd and Sb addition on the microstructural and mechanical properties of as-cast AZ31 alloys was investigated and compared. The...
197
Authors: Yan Wei Sui, Ai Hui Liu, Bang Sheng Li, Jing Jie Guo, Wei Biao Ju
Chapter 1: Materials Properties
Abstract:Ti-6Al-4V alloy castings are made by means of induction melting technology. The relationships between grain size and tensile strength, yield...
496