Paper Title:
Tribological Behaviour of Ceramic Coatings Formed on Titanium Alloy through Miro-Arc Oxidation Technique
  Abstract

In the present work, the wear behaviour of coatings produced on Ti-6Al-4V alloy by micro-arc oxidation method was studied. The wear tests were performed using a pin-on-disc wear machine under dry sliding conditions. It is found that the MAO coating can efficiently improve the wear-resistant performance of Ti alloy in the test range of this paper. The coated samples demonstrated wear rates up to 5-12 times lower than that of the uncoated substrates tested. The wear behaviours are deeply characterized by the variations of coating structure and composition.

  Info
Periodical
Key Engineering Materials (Volumes 353-358)
Edited by
Yu Zhou, Shan-Tung Tu and Xishan Xie
Pages
898-901
DOI
10.4028/www.scientific.net/KEM.353-358.898
Citation
X. T. Sun, C. X. Lin, "Tribological Behaviour of Ceramic Coatings Formed on Titanium Alloy through Miro-Arc Oxidation Technique", Key Engineering Materials, Vols. 353-358, pp. 898-901, 2007
Online since
September 2007
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Yong Song Xie, Xin Ge Zhang, Mark Robertson, Radenka Maric, Dave Ghosh
Abstract:An SOFC must have sufficient mechanical strength and interface adhesion to ensure it can be handled without breakage during fabrication and...
1421
Authors: G. Deniz, Saduman Sen, Ugur Sen
Abstract:In this work, some surface properties of AISI M2 steel were improved by a thermoreactive deposition process. Gas nitriding was realized on...
219
Authors: Antonio Forn, Isabel Espinosa, Maite T. Baile, Elisa Rupérez
Abstract:Semi solid processing reduces porosity and amount of trapped gas and it allows heat treatment T6 that improves a hard anodized oxide layer....
755
Authors: Ju An Zhao
Abstract:A multi-layer coating SiC/ Si - MoSi2 /MoSi2 with good oxidation resistance has been developed by using the slurry-sintering method on the...
1
Authors: Tomohiro Sasaki, Takahiro Yagi, Takehiko Watanabe, Atsushi Yanagisawa
Chapter 20: Surface Engineering & Coatings
Abstract:Diffusion treatments of TiAl-based alloys (49.1 at% Al) aluminum coated by thermal spray were carried out at the temperature range of...
2571