Paper Title:
Isothermal Rolling of Mg-Based Laminated Composites Made by Explosion Cladding
  Abstract

Rolling of Al-Mg-Al tri-layer composite material fabricated by the explosion cladding method was simulated using finite element methods. The rolling temperature was determined based on the flow stresses of AZ31 magnesium alloy and 7075 Al alloy at elevated temperature. The strain distribution in the plates during rolling and effects of the reduction ratio on the separation in the Al/Mg/Al laminate were studied. The simulation agrees with experimental results.

  Info
Periodical
Edited by
Jun Wang,Philip Mathew, Xiaoping Li, Chuanzhen Huang and Hongtao Zhu
Pages
614-619
DOI
10.4028/www.scientific.net/KEM.443.614
Citation
X. P. Zhang, M. J. Tan, T. H. Yang, J. T. Wang, "Isothermal Rolling of Mg-Based Laminated Composites Made by Explosion Cladding ", Key Engineering Materials, Vol. 443, pp. 614-619, 2010
Online since
June 2010
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Chang Liang Li, Hua Ding, Yong Qing Zhao, Lian Zhou
Abstract:Superplastic forming provides a good way for Ti alloys which are usually difficult to be deformed. Ti75 alloy with a nominal composition of...
2969
Authors: Zhi Guo Chen, Zi Qiao Zheng, Dong Feng Han
Abstract:The hot deformation behaviors and microstructure in Al-Cu-Li alloy containing small amount of Ag and Mg were investigated by transmission...
1925
Authors: Zhi Min Zhang, Qiang Wang, B.C. Li, X. Zhang
Abstract:Warm compression tests of AZ31 Mg alloy were carried out at five temperatures in 30°C intervals from 210°C to 330°C. The samples of...
1813
Authors: Cui Li, Wei Qi, Kutsuna Muneharu
Abstract:A zircon coating was applied on the surface of Ti-6Al-4V alloy by plasma spray and its effect on the high temperature tensile properties of...
547
Authors: Xin Wu Ma, Guo Qun Zhao, Wen Juan Li
Chapter 5: Materials Processing and Chemical Technologies
Abstract:A new method for determination of friction coefficient in sheet metal forming of Mg alloy AZ31B is presented in this paper. The method is...
430