Optimization of Nozzle Flushing Method for Smooth Debris Exclusion in Wire EDM
| Periodical | Key Engineering Materials (Volume 516) |
|---|---|
| Main Theme | Proceedings of Precision Engineering and Nanotechnology |
| Edited by | W.B. Lee, C.F. Cheung and S. To |
| Pages | 73-78 |
| DOI | 10.4028/www.scientific.net/KEM.516.73 |
| Citation | Takuya Fujimoto et al., 2012, Key Engineering Materials, 516, 73 |
| Online since | June, 2012 |
| Authors | Takuya Fujimoto, Akira Okada, Yasuhiro Okamoto, Yoshiyuki Uno |
| Keywords | CFD, Debris Exclusion, Flow Field, Jet Flushing, Wire EDM |
| Price | US$ 28,- |
In a wire EDM using a thin wire electrode, better exclusion of debris from the machined kerf is important in order to maintain stable machining performance, since the area of spark generation is along a line and very small. When large amounts of debris stagnate in the gap, secondary discharges possibly occur and these discharges easily concentrate on the same location, which leads to unstable machining performance, wire breakage, low machining rate and a low shape accuracy. Conventionally, the exclusion of debris is carried out by jet flushing with an upper and lower nozzle. However, the flow field of machining fluid in the kerf due to the jet flushing and the effect of jet flushing conditions from the nozzles on debris exclusion have not yet been sufficiently examined. This study aims to clarify the flow field in the machined kerf by computational fluid dynamics (CFD) and to propose new jet flushing methods for smooth debris exclusion in the wire EDM. The effects of workpiece thickness and machined kerf length on the flow field of working fluid in the kerf under conventional jet flushing conditions are discussed. Then, jet flushing with a tilting nozzle is proposed in order to decrease the debris stagnation area near the wire electrode. As a result, by using the tilting nozzle, removal rate can be improved because of the smooth debris exclusion.
