Paper Title:
Rolling and Annealing Textures of SiCw/Al Composite
  Abstract

A squeeze casting 15vol.%SiCw/Al and pure aluminum were cold rolled to 50 pct reduction in thickness and then annealed at 500°C for 1h. The textures of the treated materials were examined using XRD. The dominant texture components in the cold rolled composites consisted of {112}<111>、{100}<011> and {123}<634> and were much weaker than those in the cold rolled aluminum. The new texture components in annealed composites were {211}<213>、{013}<131> and {011}<211> and had the similar intensity as those remained from the deformation state. This indicated that the recovery reaction and recrystallization occurred simultaneously when the cold rolled composite was annealed at 500°C. Also, the annealing texture was much weaker in the composite than that in the aluminum. The weaker deformation and annealing textures in the composites can be attributed to the introduction of the whiskers.

  Info
Periodical
Materials Science Forum (Volumes 475-479)
Main Theme
Edited by
Z.Y. Zhong, H. Saka, T.H. Kim, E.A. Holm, Y.F. Han and X.S. Xie
Pages
917-920
DOI
10.4028/www.scientific.net/MSF.475-479.917
Citation
W.L. Zhang, M.Y. Gu, D. Z. Wang, "Rolling and Annealing Textures of SiCw/Al Composite", Materials Science Forum, Vols. 475-479, pp. 917-920, 2005
Online since
January 2005
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Saidmurod Akramov, Min Gu Lee, In Soo Kim, Dong Young Sung, Byung Hyun Park, Ingi Kim
Abstract:By severe plastic deformation of metals, an ultra fine grain size can be obtained. In the present study an AA 1050 Aluminium alloy has been...
803
Authors: T. He, Y.D. Liu, Yan Wu, Q.W. Jiang, Gang Wang, Yan Dong Wang, Liang Zuo
Abstract:An experimental setup was designed to study the recrystallization kinetics of Interstitial Free (IF) steel in this work. The 80% cold rolled...
417
Authors: Zhi Gang Wang, Zheng Zhi Zhao, Ai Min Zhao, Jie Yun Ye
Chapter 2: Manufacturing and Design Science
Abstract:Deep drawing dual phase steel was designed and trial-produced in the laboratory. The microstructure and recrystallization texture was studied...
1223
Authors: Ho Jun Bang, Ha Guk Jeong, Jong Beom Lee
B. Eco-Materials Processing and Design, Multifunctional Materials
Abstract:Mg alloy sheets exhibit the yield strength of 280 MPa and elongation of 18 % by rolling at 423 K. Elongation of Mg alloy sheets was improved...
190
Authors: Mei Ling Fang, Jie Zhu, Ji Heng Li, Chao Gan, Ming Ming Li, Xue Xu Gao
Chapter 1: Materials Engineering and Materials Processing
Abstract:The influence of heat treatment on damping capacity of (Fe83Ga17)99.5B0.5 wires was investigated...
165