Paper Title
Page
Authors: Kazutoshi Nishimoto, Kazuyoshi Saida, Boyoung Jeong
Abstract:A new conceptual bonding technique, " hyper-interfacial bonding" has been proposed as the most effective bonding technique for ultra-fine...
437
Authors: Yasushi Fukuzawa, Shigeru Nagasawa, Masahiro Watanabe, Shigehiko Takaoka
Abstract:To develop the new bonding method under low bonding temperature and short holding duration, pulse electric current sintering (PECS) method is...
443
Authors: Ji Tai Niu, Wei Guo, Jin Fan Zhai, Jie Yu, Bao You Zhang
Abstract:In this paper, the interface behavior in Liquid Phase Impact Diffusion Welding (LPIDW) of Aluminum Matrix Composite has been studied. Results...
449
Authors: Hidefumi Date, Masatoshi Futakawa, Masaaki Naka
Abstract:The impact welding of aluminum onto copper was carried out using a gas gun and the mechanical properties of Al/Cu joint were investigated by...
455
Authors: Masakatsu Maeda, Kazuyuki Tenyama, Toshiya Shibayanagi, Masaaki Naka
Abstract:The microstructure of the solid-state diffusion bonded interfaces of silicon carbide (SiC) and titanium aluminide (TiAl) were investigated. A...
461
Authors: Hui Jie Liu, Jicai Feng
Abstract:Vacuum brazing of a TiAl-based alloy to a medium-carbon steel has been carried out at 1173 K for 2-40 min using Ag-Cu-Ti and Ag-Cu-Zn filler...
467
Authors: Hong Yuan Fang, Jian Guo Yang, Jun Feng Hu
Abstract:The joints of Al2O3/Al2O3 are brazed with (Ag72Cu28)97Ti3-10vol.%Al2O3 composite filler materials, in which Ti and Al2O3 particulates...
473
Authors: Seiji Katayama, Sung Min Joo, Masami Mizutani, Han Sur Bang
Abstract:With the intention of improving butt or lap joint of dissimilar materials, specially devised weld beads together with lap and butt-joints...
481
Authors: Akio Hirose, Kojiro F. Kobayashi
Abstract:This paper presents laser beam welding (LBW) of an age-hardened aluminum alloy and a bake-hardening (BH) steel, which are promising materials...
487
Authors: Kazuyoshi Saida, Woo Hyun Song, Kazutoshi Nishimoto, Makoto Shirai
Abstract:The diode laser brazing of heat-resistant alloys with precious filler metals has been conducted using tandem beam which consisted of...
493
Showing 71 to 80 of 84 Paper Titles