Paper Title:
Phase Analysis in the Region Brazed with Ni-14Cr-10Co-3.5Al-2.5Ta-2.8B Filler Metal Using Electron Backscatter Diffraction
  Abstract

The phases formed in the wide-gap region brazed with Ni-14Cr-10Co-3.5Al-2.5Ta-2.8B filler metal powder in IN738 superalloy were investigated by electron backscatter diffraction (EBSD). The wide-gap brazing process was carried out in a vacuum of 2×10-5 torr at 1503 K. The region brazed with filler metal powders had a microstructure consisting of two kinds of eutectic colonies, one is Ni solid solution-CrB eutectic and the other is Ni solid solution-Ni3B eutectic. EBSD pattern analysis revealed that the CrB phase had orthorhombic structure with lattice parameters of a=0.297, b=0.786 and c=0.293 nm, and the Ni3B phase had orthorhombic structure with lattice parameters of a=0.439, b=0.522 and c=0.662 nm. The cuboidal-shaped phase precipitated in the Ni solid solution was found to be the γ' (Ni3Al) phase, which had cubic structure with lattice parameter of a=0.357 nm.

  Info
Periodical
Edited by
Byungsei Jun, Hyungsun Kim, Chanwon Lee, Soo Wohn Lee
Pages
93-96
DOI
10.4028/www.scientific.net/MSF.569.93
Citation
Y. H. Kim, S.I. Kwun, "Phase Analysis in the Region Brazed with Ni-14Cr-10Co-3.5Al-2.5Ta-2.8B Filler Metal Using Electron Backscatter Diffraction", Materials Science Forum, Vol. 569, pp. 93-96, 2008
Online since
January 2008
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: M. Hetzel, Charíya Virojanadara, Wolfgang J. Choyke, Ulrich Starke
Abstract:Ordered reconstruction phases on the 4H-SiC(1102) surface have been investigated using low-energy electron diffraction (LEED), Auger...
529
Authors: Alain Portavoce, Guy Tréglia, Boubekeur Lalmi, Christophe Girardeaux, Dominique Mangelinck, Bernard Aufray, Jean Bernardini
Abstract:Silicide sequential phase formation during tens-of-nanometer-thick metallic film reaction on Si substrate has been extensively studied....
633
Authors: A. Roustila, A. Rabehi, M. Souici, J. Chene
Chapter 6: Surface Engineering
Abstract:ZrNi intermetallic compound is used in several application fields due to its very favorable characteristics for the storage of hydrogen. The...
709
Authors: Wen Hua Hui, Fan Juan Meng, Yue Liang Li, Zhan Ping Li, Xiao Feng Xie, Li Li Cao
Chapter 2: Metal Materials
Abstract:Decorative chromium demand in the worldwide market is more than three times of hard chromium. But chromium plating processes has long been...
47