Paper Title:
Effect of Nitrogen Content on the Hot Ductility during Hot Deformation of Stainless Steels
  Abstract

Effects of nitrogen content on hot ductility of duplex stainless steels have been investigated. With the increase of nitrogen content in the duplex stainless steels, mechanical strength increased, while hot ductility and elongation decreased. With the same strain rates and deformation degree, the high nitrogen content led to the high optimum hot ductility temperature for the high nitrogen DSS alloy. These results indicated the importance of control over the shape and volume fraction of phases in duplex stainless steels to achieve the optimum hot ductility.

  Info
Periodical
Materials Science Forum (Volumes 620-622)
Edited by
Hyungsun Kim, JienFeng Yang, Tohru Sekino and Soo Wohn Lee
Pages
161-164
DOI
10.4028/www.scientific.net/MSF.620-622.161
Citation
J. Liu, G. W. Fan, P. D. Han, J. S. Liu, J. Q. Gao, J. F. Yang, "Effect of Nitrogen Content on the Hot Ductility during Hot Deformation of Stainless Steels", Materials Science Forum, Vols. 620-622, pp. 161-164, 2009
Online since
April 2009
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: E. Nagy, Valéria Mertinger, Ferenc Tranta, Jenő Sólyom
281
Authors: Chang Liang Li, Hua Ding, Yong Qing Zhao, Lian Zhou
Abstract:Superplastic forming provides a good way for Ti alloys which are usually difficult to be deformed. Ti75 alloy with a nominal composition of...
2969
Authors: Atef S. Hamada, L. Pentti Karjalainen, Mahesh C. Somani, R.M. Ramadan
Abstract:The hot deformation behaviour of two high-Mn (23-24 wt-%) TWIP steels containing 6 and 8 wt-% Al with the fully austenitic and duplex...
217
Authors: Gui Qing Chen, Gao Sheng Fu, Wen Duan Yan, Chao Zeng Cheng, Ze Chang Zou
Modeling, Analysis and Simulation of Manufacturing Processes
Abstract:The 3003 Al alloy was deformed by isothermal compression in the range of deformation temperature 300-500 °C at strain rate 0.0l-10.0...
306
Authors: Zhuang Li, Di Wu, Wei Lv, Zhen Zheng, Shao Pu Kang
Chapter 1: Materials Engineering. Technologies and Processing
Abstract:In this paper, double deformation test was conducted in a MMS-300 thermomechanical simulator. Austenite static recrystallization kinetics of...
310