Paper Title:
Dissolution and Precipitation of Excess Phases in High-Nitrogen Steels
  Abstract

Cast structure of ferric, austenitic and dual-phase high-nitrogen alloys and steels saturated with nitrogen at pressures of up to 3.2 MPa and solidified at cooling rates of 2 to 4•104 K/s has been investigated. Increasing the nitrogen concentration in the alloy and decreasing the cooling rate results in smaller nitrogen content in α and γ solutions and in larger content of crystallization nitrides.

  Info
Periodical
Materials Science Forum (Volumes 638-642)
Main Theme
Edited by
T. Chandra, N. Wanderka, W. Reimers , M. Ionescu
Pages
3026-3031
DOI
10.4028/www.scientific.net/MSF.638-642.3026
Citation
A.G. Svyazhin, L. M. Kaputkina, "Dissolution and Precipitation of Excess Phases in High-Nitrogen Steels", Materials Science Forum, Vols. 638-642, pp. 3026-3031, 2010
Online since
January 2010
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Lidia Lityńska-Dobrzyńska, Patrick Ochin, Anna Góral, Marek Faryna, Jan Dutkiewicz
Abstract:The effect of rapid solidification on the microstructure of Al-Zn-Mg-Cu alloys with 8 wt.% Zn-2 wt.% Mg-2.3 wt.% Cu and 0.2 or 0.5 wt.% of Zr...
42
Authors: Yuichi Nakahira, Tomonari Inamura, Hiroyasu Kanetaka, Shuichi Miyazaki, Hideki Hosoda
Abstract:Effect of nitrogen (N) addition on mechanical properties of Ti-Cr-Sn alloy was investigated in this study. Ti-7mol%Cr-3mol%Sn was selected...
2126
Authors: Xiao Ping Luo, Lan Ting Xia, Ming Gang Zhang
Abstract:The effect of Cd and Sb addition on the microstructural and mechanical properties of as-cast AZ31 alloys was investigated and compared. The...
197
Authors: S.P. Nikanorov, B.K. Kardashev, B.N. Korchunov, V.N. Osipov
Chapter 4: Dislocation Dynamics
Abstract:Acoustic measurements of Young’s modulus and internal friction at frequencies of longitudinal vibrations of about 100 kHz were made in the...
161
Authors: S.G. Shabestari, R. Gholizadeh
Chapter 2: Forming in Melt or Near Melt Condition
Abstract:Dense precipitation of various intermetallic compounds is a common feature in the microstructure of Al-Si piston alloys. In this...
289