Paper Title:
Roll Casting of Al-SiCp Strip
  Abstract

The strip casting of Al-SiCp alloy was operated by a high speed twin roll caster. The content of SiCp was 20Vol% and 30Vol%. Both of Al-20Vol%SiCp and Al-30Vol%SiCp strips could be cast continuously at the speed up to 90m/min. The SiCp particle distributed uniformly. This was the effect of fine grain of the strip. The as-cast strip of Al-20Vol%SiCp could be cold rolled after homogenization. The as-cast strip of Al-30Vol%SiCp could be cold rolled after once hot rolling and annealing. The as-cast strip of Al-20Vol%SiCp could be coiled at the diameter of 460mm.

  Info
Periodical
Materials Science Forum (Volumes 675-677)
Edited by
Yi Tan and Dongying Ju
Pages
811-814
DOI
10.4028/www.scientific.net/MSF.675-677.811
Citation
T. Haga, T. Nakamura, S. Kumai, H. Watari, "Roll Casting of Al-SiCp Strip", Materials Science Forum, Vols. 675-677, pp. 811-814, 2011
Online since
February 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: M. Kolář, Vladivoj Očenášek, J. Uhlíř, Ivana Stulíková, Bohumil Smola, Martin Vlach, V. Neubert, K. Šperlink
Abstract:The influence of plastic deformation and heat-treatment on the precipitation of Al3(Sc, Zr) particles and the effect of these precipitates...
357
Authors: E.P. Masuku, Gonasagren Govender, L. Ivanchev, Heinrich Möller
Abstract:Rheocasting of alloys A206 and A201 was investigated in this study. Conical bars with different silver contents were produced using CSIR...
151
Authors: Yong Xue, Zhi Min Zhang, Li Hui Lang, Li Li
Abstract:In the present paper a research has been made on the effect of aging on the microstructure and mechanical properties of AZ80 and ZK60 wrought...
560
Authors: Xiao Ping Luo, Lan Ting Xia, Ming Gang Zhang
Abstract:The effect of Cd and Sb addition on the microstructural and mechanical properties of as-cast AZ31 alloys was investigated and compared. The...
197
Authors: Yu Jun Zhang, Dong Ying Ju, Weng Yu Zhang, Yao Yao, Hong Yang Zhao, Xiao Dong Hu, Wei Teng
Chapter 8: Technical Provision of Researches and Technological Processes
Abstract:In this paper, the stiffness compensation is used in the roll-gap controller to improve the reliability of the control system. Simulation...
207