Paper Title:
Elevated Temperature Mechanical Properties of Al-8.5Fe-1.3V-1.7Si/SiCP Composite Prepared by Multi-Layer Spray Deposition
  Abstract

Al-8.5Fe-1.3V-1.7Si/SiCP composite prepared by multi-layer spray deposition in different states were investigated. Ultimate tensile strengths of the composite sheets as-rolled tested at 315°C and 400°C are up to 300MPa and 186MPa respectively. The fine dispersoids and fine grains, and homogeneous SiC particles contribute to the excellent mechanical properties of the composite at elevated temperature. Specially, partial dissolution of SiC particles contributes to the stability of Al12(Fe,V)3Si phase.

  Info
Periodical
Chapter
Chapter 2: Frontiers of Materials Science and Engineering
Edited by
Ran Chen
Pages
708-712
DOI
10.4028/www.scientific.net/MSF.694.708
Citation
Y. Q. He, B. Qiao, L. C. Feng, "Elevated Temperature Mechanical Properties of Al-8.5Fe-1.3V-1.7Si/SiCP Composite Prepared by Multi-Layer Spray Deposition", Materials Science Forum, Vol. 694, pp. 708-712, 2011
Online since
July 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Jeong Min Kim, Bong Koo Park, Joong Hwan Jun, Ki Tae Kim, Woon Jae Jung
Abstract:Small amounts of minor alloying elements such as RE and Sr were added to Mg- 8wt%Al-5wt%Zn (AZ91D+4%Zn), and their effects on the...
374
Authors: M. Kolář, Vladivoj Očenášek, J. Uhlíř, Ivana Stulíková, Bohumil Smola, Martin Vlach, V. Neubert, K. Šperlink
Abstract:The influence of plastic deformation and heat-treatment on the precipitation of Al3(Sc, Zr) particles and the effect of these precipitates...
357
Authors: E.P. Masuku, Gonasagren Govender, L. Ivanchev, Heinrich Möller
Abstract:Rheocasting of alloys A206 and A201 was investigated in this study. Conical bars with different silver contents were produced using CSIR...
151
Authors: Bao Hong Zhu, Bai Qing Xiong, Yon Gan Zhang, Udo Fritsching, Ji Shan Zhang, Feng Wang, Zhi Hui Li, Hong Wei Liu
Abstract:A high Zn content Al-Zn-Mg-Cu alloy was prepared by spray forming process and the precipitate behavior and microstructure of the extruded...
481
Authors: Rupa Dasgupta, Satyabrata Das, Amol Kumar Jha
Friction and Wear in Material Processing
Abstract:Metal Matrix Composite made from Al-7075 based alloy dispersed with 10% SiC particles through the liquid metallurgy route were evaluated for...
555