Paper Title:
Texture Changes of Asymmetrically Rolled AA 1050 Al Alloy Sheets
  Abstract

Texture of Al alloy is affected to the formability and mechanical properties. In this paper, it was studied that the change of texture and formability of AA 1050 Al alloy sheets which were asymmetrically rolled. Asymmetrically rolled Al sheets showed that the distorted rotated cube texture, {001}, γ-fiber, ND// and {120} and {120} components were increased. The change of texture components after the asymmetrical rolling could be affected to the variation of plastic strain ratios of the asymmetrically rolled AA 1050 Al alloy sheets.

  Info
Periodical
Materials Science Forum (Volumes 702-703)
Chapter
Chapter 2: Deformation
Edited by
Asim Tewari, Satyam Suwas, Dinesh Srivastava, Indradev Samajdar and Arunansu Haldar
Pages
332-335
DOI
10.4028/www.scientific.net/MSF.702-703.332
Citation
J. H. Lee, I. S. Kim, "Texture Changes of Asymmetrically Rolled AA 1050 Al Alloy Sheets", Materials Science Forum, Vols. 702-703, pp. 332-335, 2012
Online since
December 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Zhi Min Zhang, Qiang Wang, B.C. Li, X. Zhang
Abstract:Warm compression tests of AZ31 Mg alloy were carried out at five temperatures in 30°C intervals from 210°C to 330°C. The samples of...
1813
Authors: Ivo Stloukal, Jiří Čermák
Abstract:Coefficient of 65Zn heterodiffusion in Mg17Al12 intermetallic and in eutectic alloy Mg - 33.4 wt. % Al was measured in the temperature...
189
Authors: Cui Li, Wei Qi, Kutsuna Muneharu
Abstract:A zircon coating was applied on the surface of Ti-6Al-4V alloy by plasma spray and its effect on the high temperature tensile properties of...
547
  | Authors: Atsunori Kamegawa, Toru Iwaki, Masuo Okada
Abstract:Effects of hydrogenation process of the microstructure, electrical conductivity and mechanical properties for the Cu-(1~3) mass%Ti alloys...
1319
Authors: Cui Fang Duan, Wei Li, Ji Liang Zhang
Chapter 4: Material Engineering and its Application Technology
Abstract:This article studies aluminum alloy plate through 16 to 3mm thick with a hole under room temperature fracture test. The experimental results...
315